Bedienungsanleitung Midland bt 1 intercom twin set (Seite 11 von 21) (Englisch)

232762

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

English

passenger will now be able to listen to the same informa-

tion/music that the rider hears. To return to the private mode,

press the “Intercom” button once more.(you will hear two au

dio conﬁrmation tones).

Using the wired audio input

Your Midland BT1 is also ﬁtted with a wired audio input (labe-

led AUX), that can be used to connect a stereo audio source,

like an iPod (or any other MP3 Player) or a GMRS transceiver

for bike-to-bike communications.

Priority: the wired audio input has the lowest priority

when compared to the other Bluetooth connections (in

cluding the Intercom) and will therefore always be disa

bled when another Bluetooth communication is opened.

Listening to music

To listen to music from the wired input, connect the audio

source using the cable supplied with the BT1 unit. The volu

me level is automatically adjusted by the AGC system, which

means that you only need to adjust the volume of your iPod/

MP3 player to a level that will allow you to listen to music in

normal speed.

Attention: never set the volume of the MP3 Player to the

maximum possible.

Hint: We recommend that you perform a few tests adjusting

the volume of your iPod/MP3 player so at the normal speed

the Headset volume is suited to your needs.

The AGC system will automatically increase the volume on

higher speed. Make a note to remember this setting for future

trips.

Attention: the volume adjustment, (“Volume+” and “Vo

lume –“) buttons, cannot be used to adjust the volume of

the wired audio source(eg MP3 player), only the volume

of the BT1 that the device is connected to.

Enabling/disabling the wire input

The wire input can be enabled and disabled by means of the

“AUX” button.

› Disabling: brieﬂy press the “AUX” button (you will hear two

audio conﬁrmation tones).

› Enabling: brieﬂy press the “AUX” button (you will hear one

audio conﬁrmation tone).

Using a Two Way Radio transceiver

To be able to use the transceiver, it is necessary to purchase

a speciﬁc cable (sold separately) in order to connect the radio

to your Midland BT1:

› Note: Some manufacturers radios use a different pin

conﬁguration, so we recommend that you ask your

dealer as to which cable is best suited to your needs

To communicate via the attached radio, press the transmis

sion Press To Talk (PTT) button to speak and release it to

listen. It is not possible to talk and listen simultaneously. The

cable connected to the transceiver has a PTT button that can

be placed on the handlebar of your bike or held in your hand

(If you are the passenger rider).

Adjust the volume of the transceiver to your needs, remem

bering that the volume adjustment is controlled by the auto

matic AGC system and that it will therefore be automatically

increased in relation to background noise.

Special conﬁgurations

Some Midland BT1 features can be conﬁgured to suit the

speciﬁc needs of bikers.

› Permanently enable 3-way communications

› Voice enable Intercom (VOX)

Adjust the microphone sensitivity

Disable the VOX feature

Permanently enabling 3-way communications

The music coming from the wired connection is interrupted by

default when the Intercom feature is enabled.

By enabling this feature, what is heard from the wired con

nection is not interrupted but switched to the passenger’s

device.

This feature can be useful, for example, if you wish to main

tain Intercom communications and simultaneously talk using

a transceiver radio connected with a wired connection.

In addition it also allows you to share the music between

Rider and Passenger. Considering that the music quality is

“mono” for the second person who will share the music (see

the chapter “Share the music between driver and passenger”

below).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland bt 1 intercom twin set Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland bt 1 intercom twin set

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info