Bedienungsanleitung Midland BT City 2013 (Seite 7 von 16) (Englisch)

543239

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

GPS voice announcement

When the GPS is paired to the “Volume +” button,(high priority) the

street voice announcement will always interrupt the intercom.

When paired using the “Volume -” button, (lower priority) the voice

announcement are always in background also if the intercom is active.

AUX wired connection

Music or audio from the AUX wired connection, by default it is always

in the background also when the intercom is open or during a phone

call. It is possible to change this beaver following the procedure de-

scribed in the “Setup and Special conguration” chapter.

Pairing to other Bluetooth devices

The BTCity unit can be paired to other Bluetooth devices, like Phone,

GPS Navigator or PMR446 Radio with built-in or external Bluetooth.

The pairing procedure must be done using the “Volume +” or the

“Volume -“ buttons.

› Pairing to the “Volume +” button: for Phone with music

(A2DP stereo).

› Pairing to the “Volume -” button: for GPS navigators and other

devices which the audio must be always in background.

Attention: The “Volume -” button does not support the pairing with a

phone and do not support A2DP Stereo Music.

Using the telephone features

The cellular phone can be paired only to the “Volume +”, in this way

it is possible to manage all the phone functionalities and listen to the

stereo music. An incoming call has the higher priority, that means all

other communications will be closed (Intercom, Music).

Pairing the unit with a mobile phone

1. Enable the Bluetooth device search feature on your mobile phone.

As this procedure varies according to the brand and model of the

mobile phone, refer to the manual supplied to your particular pho-

ne for further information.

2. Press and hold down the middle button about 7 sec., until the Red

light is on permanently (setup mode). Now press for 3 seconds the

“Volume +” button, the Blue and Red light will ash.

3. After a few seconds the mobile phone will display “Midland BTCi-

ty”. Select it and follow the instructions provided in your mobile

phone manual to accept the pairing. When prompted, enter the

pairing code, which is 0000 (four zeroes). Your mobile phone

should then display a conrmation message if the pairing opera-

tion has been successfully completed

4. The BTCity will automatically exit the set up mode (red indicator

on) and go to the working mode (blue light ashing).

Answering a call

When you hear the phone ring, you can answer in two dierent ways:

Vocally:

Simply say one word to answer the call and start talking.

Manually:

Tap the “Control” button and start speaking.

Rejecting a call

If you don’t wish to answer, you can let the mobile phone ring or press

the “Control” button for 3 seconds (you will hear one audio conrma-

tion tone).

› GPS

› PMR446 Radio

› Phone (GPS)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BT City 2013 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BT City 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info