Bedienungsanleitung Midland BTX1 FM (Seite 17 von 28) (Englisch, Italienisch)

543246

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

16 - Midland BTX1 FM

Description of the installation brackets

The Midland BTX1 FM can be xed onto the helmet in two dierent ways: By ei-

ther using the plate with bi-adhesive strip, or the clamp. These methods allow you

to safely “x” the BTX1 FM unit onto your helmet and to remove it at any time in

order to recharge or store it.

Plate with bi-adhesive strip

The xing plate has a bi-adhesive strip on one of

its sides. To x the plate in place, clean the appli-

cation area on the helmet surface, remove the bi-

adhesive lm and

place the xing plate on the helmet by keeping it

contact with the surface for a few seconds.

Screw Clamp

Using the Allen Key, loosen the two screws on the clamp and place the Backward

plate between the helmet padding and the external rigid protection. Then,

tighten the two screws in order to rmly x the clamp in place. Inside the clamp is

included a small plastic spacer that can be removed to give a tighter t if required.

Fitting and removing your Midland BTX1 FM

The BTX1 FM can be easily tted onto the helmet by sliding it downwards so that

it ts into the slot of the selected xing device (plate with bi-adhesive strip or

clamp). BTX1 FM is maintained in position thanks to the xing clip located on

the upper section (A).

To detach the BTX1 FM, simply press the xing clip and push the unit upwards.

Switching your Midland BTX1 FM on and oﬀ

Switching the unit on:

Press and hold “Middle” button down for approximately 3 seconds until the BLUE

indicator lights.

Switching the unit oﬀ:

Press and hold both “Middle” and “Backward” buttons together for approximately

3 seconds until the RED indicator ashes 3 times, thus lessening the chances that

you might turn o the unit accidentally (especially whilst wearing gloves).

Operative “mode”

The BTX1 FM can operate in three main “mode”: Intercom, Phone and FM Radio.

The 3 multi function buttons can have dierent functionality depending on which

mode the unit is at that moment.

› In “Intercom mode” the middle buttons let you manage the communications

between driver and passanger

› In “Phone mode” you can manage your Bluetooth cellular phone to place/

answer a phone call or to listen to the music (in stereo mode). Please use your

phone responsibly and safely.

› In “FM Radio mode” you can listen to your favourite radio station in stereo,

seek for a specic radio station and save it (6 memory are available).

You can switch (toggle) from one mode to the other simply pressing the Middle

button for 3 seconds. A voice announcement will tell in which mode you are on.

The toggle sequence is the following:

› Intercom mode (if another unit has been paired)

› FM Radio

› Phone mode (if a phone has been paired)

Every time you turn on the unit, the default mode is Intercom (if it was previously

paired to another unit), otherwise it will be Phone (If was paired to a phone).

If you need to know in which mode the unit currently is, just press the “Volume +

“ and “Volume –“ button together. A voice announcement will tell you the current

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX1 FM Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info