Bedienungsanleitung Midland BTX1 FM (Seite 21 von 28) (Englisch, Italienisch)

543246

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

20 - Midland BTX1 FM

Available controls:

› To play/pause music: click on the “Middle” button.

› To skip forward to the next song: press the “Forward” button.

› To skip backwards to the previous song: press the “Rear” button..

Priority: the music listening mode has the lowest priority. Therefore, it will always be

disabled when another type of communication is enabled.

Attention: It is possible to control A2DP Stereo music only in “Phone Mode”

How to pair the BTX1 FM to a GPS

In general is possible to pair the BTX1 FM to all the GPS for motorbike that sup-

port Bluetooth headset connection.

To pair the BTX1 FM to a GPS, you must rst enter the setup mode:

1. Turn o the unit

2. Press and hold down the “Middle” button about 7 sec., until the Red light is

on permanently.

3. Now press rmly (3 sec) the “Volume +” button, the Blue and Red light will

ash.

4. Enable the Bluetooth device search feature on your GPS

5. After some seconds, “Midland BTX1 FM” will be displayed on your GPS.

6. Follow the pairing procedure of your GPS. If a pin code is requested you must

enter “0000” (four times zero).

7. When successfully paired, the Blue light of the unit will be on for one second

and then the unit will exit the setup mode and switch to the working mode

(the Blue light will start ashing).

When you pair the GPS to the Volume + button, you loose the possibility to pair

the phone to the BTX1 FM unit. You can overcome this limit by pairing the phone

directly to the GPS and then the GPS to the BTX1 FM unit. All the phone features

are therefore managed by the GPS itself.

GPS navigator always in background

To keep the intercom open while the GPS give the street indication you must have

the “background” feature active.

Attention: we can’t garantee this features because is depending on third part

device.

How to listen to the FM Radio

The FM Radio receiver is integrated inside the unit. You just need to switch to the

“FM Radio” mode in order to use it. Long press the middle button until you hear “FM

radio” from the voice announcement. Now all the three main button are dedicated

to the FM Radio (See Table).

Press short the Forward or the Backward button to seek the FM Radio station. When

you press long the Forward or the Backward button, you can scan up or down the 6

recorded stations. A voice announcement will tell you the number of which memory

you are entering. A double beep tone will be played when the last or the rst recor-

ded station is reached.

To save the station you are listening, press the Forward and Backward buttons toge-

ther for 3 sec. You will hear a beep tone for conrmation.

The station is saved over the last recorded station used.

Thanks to the RDS system, the FM Radio will choose the strongest signal available for

the radio station you like to listen.

The RDS system is OFF by default, if needed you can toggle on/o the RDS pressing

together the “Volume +” and “Volume –“ buttons for 3 sec when the radio is on. A

voice announcement will tell you the RDS status.

FM Radio with intercom

When you are in “FM Radio” mode is not possible to manually open the intercom,

you can only open it using VOX feature (just talk) to the unit paired on the “Middle”

button. To manually activate the intercom you must switch to “Intercom” mode.

How to Disable/Enable the FM Radio

By default the FM radio is on.

Disabling:

› Enter the “Setup” mode: turn o the unit and hold down the “Middle” button

about 7 sec., until the Red light is on permanently.

› Press “Middle” and “Volume+” buttons together for 3 seconds. The blue LED will

ash twice.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTX1

FM.

Enabling:

Radio FM mode

Mode Forward button Middle button Backward button

FM Radio Short press: seek station up

Long press: Scan recorded

Short press: On/o

Long press: Change mode

Short press: seek station down

Long press: Scan recorded

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX1 FM Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info