Midland CT890 instruction guide | 11
be forced in reception mode. When a transmission exceeds the pre-set
time, you will hear a warning sound to remind you that the transmission
time is almost finished.
The transmission time can be set in 60 levels with 15 seconds each
(between 15 and 900 seconds).
In standby mode, press MENU + 6; the screen will display “TOT”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
encoder to select the desired TOT level, then press MENU to confirm.
To return to the standby mode press EXIT.
VOX (VOX) - MENU 7
This function allows hands-free conversations: just speak in the direction
of the microphone and the communication will be automatically activa-
ted.
In standby mode, press MENU + 7. The screen will display “VOX”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
encoder to turn off the VOX function or to select the VOX level (1-10),
then press MENU to confirm.
To return to the standby mode press EXIT.
NOTE: level 1 is the least sensitive while level 9 is the most sensitive. When the
radio is in Scan or FM Radio mode, the VOX is not enabled.
Wide/narrow bandwidth (WN) - MENU 8
In standby mode, press MENU + 8. The display will show “WN”.
Press MENU to enter the function. Press the ▲/▼ keys or rotate the en-
coder to select WIDE/NAR (25/12,5KHz) bandwidth, then press MENU to
confirm. To return to the standby mode press EXIT.
Voice function (VOICE) - MENU 9
In standby mode, press MENU + 9; the screen will display “VOICE”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
encoder to select OFF/ON. Confirm your selection by pressing MENU.
To return to the standby mode press EXIT.
