6 | Midland D-200 instruction guide
Main controls and parts of the radio
1. Antenna
2. Encoder: rotate clockwise or counter-clockwise to select the desi-
red channel.
In PMR446 channels the radio will confirm the selection with a
beep.
DPMR446: in DPMR446 channels no beep will be heard. This
sound message can be disabled through the programming softwa-
re.
3. Power/volume knob- turn clockwise to power on and increase the
volume level. Turn counter-clockwise to decrease the volume level
and power off.
4. Speaker
5. Built-in microphone
6. Led indicator:
RED: TX; GREEN: RX.
7. PTT: press this button to transmit and release it to receive.
DPMR446: in DPMR446 channels the pressure of the PTT button
corresponds to the group call. By means of the programming sof-
tware, you can match the pressure of the PTT to the sending of the
standard call (call to All).
8. Function key 1: Hold down this button to activate the Monitor
function (PMR446 channels).
DPMR446: in DPMR446 channels the pressure of this key enables
the single call sending. To transmit, keep it pressed.
9. Function key 2: not programmed by default (PMR446 channels).
DPMR446: in DPMR446 channels if you hold down this key, D-200
will send a call to the group you belong (group call).
10. External Speaker/Mic Jack- allows the connection with external de-
vices such as headsets, microphones.
