20 | Midland G9PRO instruction guide
Activating / Deactiving the Emergency feature
When you switch on the unit, the Emergency function is activated, but you can
disable and enable it again:
1. Press MENU till the display shows EC on.
2. Select EC of by using ▲▼ .
3. Confirm your selection by pushing PTT or wait for 5 seconds.
When the Emergency function is activated (+ blinking on the display) the fol-
lowing functions cannot be used: Scan, Monitor, Dual Watch, Out of Range.
Changing the emergency channel
The emergency channel originally preset is P8 DCS 50; but you can change it
according to your needs.
Important: be sure that the Emergency function is active! (+ blinking). If you
decide to change the channel dedicated to the Emergency function, do not forget
to make the same change to all the radios!
1. Press the MENU button until the display shows EC on.
2. Push MENU again (of displayed) and select the desired channel by me-
ans of ▲▼.
3. To confirm press PTT or wait for 5 seconds.
Important: be sure that the Emergency function is active! (+ blinking).
If you decide to change the channel dedicated to the Emergency function, do not
forget to make the same change to all the radios!
To set again the original Emergency channel (P8 DCS 50)
1. Press the MENU button until the display shows EC on.
2. Push MENU again and select of
3. To confirm press PTT or wait for 5 seconds.
If you dedicate any of the standard channels to the Emergency function, remem-
ber to use it only for this purpose, otherwise you will cause interferences.
