12
GETTING STARTED
To power ON: press the Power/Mode button.
To power OFF: press and hold the Power/Mode button.
SETTINGS
1. To enter the Settings menu, press the Power/Mode button for 3 times.
2. Use the UP/DOWN controls to browse the settings.
3. To select a function and change its setting, press the Shutter/Select control and then UP
or DOWN to choose the desired option.
4. Press Shutter/Select to confirm your selection.
5. To exit the Setting menu, press the Power/Mode button (if you exit the menu without giv-
ing a confirmation, H3+ will keep the latest option selected).
MENU
› Resolution: 1920x1080 (FHD), 1440x1080 (HD), 1280x720 (HD Ready) 848X480
WVGA and 640x480 (VGA).
› Exposure: allows to adjust the exposure between -2.0 and +2.0.
› Motion detection: if this feature is enabled and the camera is on, it automatically starts
recording as soon as a movement is detected.
› Looping video-Cyclic record: the camera records continuously and when the memory is
full, it overwrites the older videos. Videos will be split in dierent files with a pre-set dura-
tion.
› Video lapse: H3+ takes a photo at pre-set time intervals, creating a single video.
› WDR (High quality ): this feature improves the video definition. It improves the overall ex-
posure throughout the entire image. It enables the camera to pick up greater detail in dark
shadows and makes sure the highlights won’t get blown-out.
› Record Audio: activates/deactivates the microphone (the audio recording).
› Date stamp: Date and time on videos.
› Image size: 16/12/10/8/5/3/2/1.3 MP/VGA.
› Quality: set the desired level.
› Capture mode: sets the delay time for the self timer.
› Burst (Continuous shooting): the camera takes photos at pre-set time intervals (3/10
seconds).
› Sharpness: adjusts the contrast of the photo.
› ISO: regulates the light sensitivity 100/200/auto.
› Anti-shaking: image stabilizer.
› White Balance: adjusts the sensitivity to white color: Auto, Daylight, Cloudy, Tungsten,
Fluorescent
› Frequency: adjusts video frequency 50Hz/60Hz.
› OSD mode: allows to visualize the display information.
› Screen saver: sets the automatic turning o of the display (o/ 1 minute/2 minutes /3
minutes).
