Bedienungsanleitung Midland M10 (Seite 9 von 35) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

738472

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

2 | M-10 Instruction Guide M-10 Instruction Guide | 3

9 2 3 10

18756 4

B D

TX RX

CONTROLS DESCRIPTION

FRONT PANEL

1. UP/DOWN buttons: channel selection. Short press: increase/decrease of

the channel number; long press: quick scroll of the channels.

Note: by switching on the radio and keeping pressed the UP button at the same

time, you can enable/disable the keypad beep and the turning on beep.

2. Display with backlight

A. Selected channel number

B. RX/TX: reception (RX) and transmission (TX) indicator

C. This icon shows that the internal speaker of the radio is selected. When

the icon blinks, M-10 is in “mute” condition (audio o)

D. Shows that you selected, through the AUDIO button, the option of the

audio coming from the 3.5mm jack (external headset). When the icon

blinks, M-10 is in “mute” condition (audio o)

Note: when both icons appear on the display, both audio outputs are

active (internal speaker and 2pin)

3. USB socket: this socket is a 5V power supply source for your devices.

4. AUDIO: this button lets you manage the audio of your CB and/or select the

desired type of audio: you can choose between the traditional mike or connect

an external accessory to the 2pin plug. Brieﬂy press the button to activate/

deactivate the radio speaker (MUTE function). The icons on the di-

splay will blink to indicate the “mute” condition. Keep pressed this control to

select the standard microphone and/or the 2pin plug. You can connect to this

plug a 2pin MIDLAND headset or the new Midland Bluetooth adaptor WA-

DONGLE that lets you use the CB remotely. Go to www.midlandeurope.com

to have a look at the Bluetooth devices of the WA line.

5. AM/FM (EC/EN): Dual-function selector.

AM/FM: To select AM or FM mode. If you select a frequency band operating

in FM mode only, this control enables the LCR function (Last Channel Re-

call).

EC/EN: when the UK band is selected (UK on the display), move this switch

to activate the EN (English) or EC (European) bands.

6. 9.NORM.19: the 3-position selector allows to switch from the standard mode

(norm) to the 9 and 19 channels that are usually used for emergency com-

munications.

7. Squelch knob: to eliminate ‘chopping’ signals during message reception and to

operate in DS mode (Digital Squelch).

8. ON/OFF-VOLUME knob: OFF position: transceiver turned o. VOLUME:

rotate the knob to select the desired volume level.

9. Microphone jack: jack for the mic connector.

10. “MIC - SPK” socket: 2Pin MIDLAND socket. You can connect to this plug

a Midland headset or earphone/mike to make your conversations “private”

and to ensure you won’t be heard all around; or you can plug-in the Midland

WA-DONGLE adaptor that makes your CB Bluetooth and then choose a

Bluetooth earphone/mike of the new WA range to suit your needs.

9 2 3 10

18756 4

B D

TX RX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland M10 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info