11
ENGLISH
5. Tighten the screws with a screwdriver so that the bracket is firmly fixed to the surface.
6. Align the transceiver on the bracket, ensuring the holes of the internal part of the bracket line up
with those on both sides of the transceiver (you can choose the preferred notch in order to best
adjust the angle of the transceiver’s front panel for ease of viewing and use (15° of variation for
each notch).
7. Mount the mounting knobs on the two sides of the bracket to soundly fix the transceiver.
Keep the transceiver and microphone at a distance of at least 1 meter from all other ma-
gnetic devices (e.g. compass) on your vessel.
4.4 Adjustment of angle
To change the angle of inclination after installation:
1. Loosen the mounting knobs on the sides of the bracket.
2. Adjust the transceiver to a better angle, lining up the holes of the internal part of the bracket
with those on both sides of the transceiver.
3. Tighten the knobs to fix the transceiver into place.
4.5 Installation of the antenna/electromagnetic exposure
For optimal radio settings and minimal user exposure to electromagnetic radiofrequency energy,
ensure that:
• The antenna is connected to the transceiver and is properly installed.
• The antenna is situated away from people and is positioned at least one meter from the tran-
sceiver and microphone.
• The connector is a standard PL259 (male UHF).
