666802
13
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
Load weight
You can enter the weight of the load manually before
the start of the programme.
2 Cottons dry 10,0 13.0 kg
0 % Drying 70°C
Cooling down e
m A
^ Turn the rotary dial to highlight the load. Press the
dial to confirm your selection. Turn the dial to alter
the weight and confirm your selection by pressing
it.
Temperature in 1 °C increments from cold, 30 to
max. 80 °C .
^ Turn the rotary dial to select the "Temperature" field
(70 °C for drying) and press it to confirm your
selection.
2 Cottons dry 13.0 kg
0 % Drying 70°C
Cooling down e
m A
^ Turn the rotary dial to alter the temperature value
and then press it to confirm your selection.
Residual moisture in 1 % increments from -4 to 40 %.
^ Turn the rotary dial to select the "Residual moisture"
field (0 %) and press it to confirm your selection.
2 Cottons dry 13.0 kg
0% Drying 70°C
Cooling down
m A
^ Turn the rotary dial to alter the residual moisture
level and then press it to confirm your selection.
^ Press the Start button and the programme selected
will commence
Once a programme has started the programme
sequence will appear in the display.
2 Cottons dry
0 % Drying >40 %{
Cooling down Ready at 12:35
mKf
In the 2nd line of the display, drying in this example,
the actual residual moisture level (>40%) and the
symbol for { Electric or * Gas heating switched on
will also be shown. The 3rd line displays the following
programme block.
The time that the programme will finish (12:35) is
shown on the right hand side of the display.
The programme end display has a self-learning
function and will not show an accurate reading until
the programme has been run several times.
At the end of a programme
2 Cottons dry
Programme finished
Anti-crease Ready at 12:35
m FC Kf
The programme end time is displayed,the buzzer
sounds and the anti-crease phase commences. The
drum will rotate at intervals to keep the laundry from
creasing.
This is useful if laundry is not going to be unloaded as
soon as the programme finishes.
^ Open the drum door.
^ Unload the drum.
Make sure nothing is left behind in the drum. If
items are left in the dryer, they could be damaged
by overdrying when the dryer is next used.
,
Do not unload laundry from the drum until after
the cooling down phase has been completed.
Hot laundry can self-ignite and cause a fire when
folded or put away.
^ Check the fluff / lint filter and clean if necessary.
2 Cottons dry
Programme finished
Check lint filter
A
A reminder will appear in the display when the filter
need to be cleaned. The filter should be cleaned as
soon as the programme finishes.
Drying
13
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele Professional PT 8337 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info