666764
28
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
Delete data
Operating data module
Programme data
Delete data e
\ A
After selecting Delete data the following
message will appear in the display:
Operating data module~ Delete data
Module: 21.02.2010
Total data: 12.07.2010 e
\ A
The module menu option can be used to
delete the total data and programme data
from the operating data memory.
The total data option can only be used to
delete the total data from the operating data.
The programme data option can only be
used to delete programme data from the
operating data.
After making your selection and pressing the
rotary dial you will be prompted to enter your
password.
Password:____
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
KSA
After keying in your password or inserting
your supervisor level key card in the reader
the following security prompt will appear in
the display:
Delete operating data?
S A
After pressing the S button the data will be
deleted!
Weighing system
If the machine has been equipped with a
weighing system module the weight of the
laundry in the machine will be displayed in
0.2 kg increments. The maximum load for
the programme selected will show next to
the actual weight in the drum.
If when the drum is empty the load display is
not showing "00,0", you will need to press
the -> I <- " to reset it
1 Cottons 00,0/ 16.0 kg
60 °C Main wash
Rinses e
+im k m -> I <- A
If after calibrating the sensor to 0 there was
still laundry in the drum the following will
appear in the display:
1 Cottons - -,-
/
16.0 kg
60 °C Main wash
Rinses e
+im k m -> I <- A
Press the -> I <- button again to set it to 0.
If there is too much laundry in the drum, e.g.
because it is wet, a nominal load will be
calculated after starting the programme and
this value will also be saved by the operating
data module.
At the end of the programme when the drum
has stopped rotating the display will show
the residual moisture content of the laundry.
1 Cottons
Programme finished Residual moisture 60 %
The door can be opened
m FC A
Optional modules
28 M.-Nr. 06 572 495
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele Professional PW 6321 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Miele Professional PW 6321

Miele Professional PW 6321 Bedienungsanleitung - Deutsch - 46 seiten

Miele Professional PW 6321 Bedienungsanleitung - Holländisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info