Bedienungsanleitung Miele PT 8331 (Seite 16 von 54) (Englisch, Holländisch)

447868

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Reprogramming individual drying

programmes

(Changing the Standard options)

Individual drying programmes can be altered to suit

specific requirements, practices and processes.

If the machine is connected to a payment system

(coin operation) it is not possible to reprogramme

the Standard options.

Before you begin, first ensure that:

–

The dryer is switched off with the "On/Off" switch.

–

The door is closed.

To access the programming level:

Press and hold the "START/STOP button and switch

the dryer on with the "On/Off" switch.

Hold the START/STOP button pressed in until the

light around the button stops flashing and lights up

constantly.

^ Release the START/STOP button.

– P will flash alternately with 1 in the segment display.

Programmable functions P 1- P 27 (see next page)

are selected by turning the rotary dial clockwise.

They can also be selected by pressing the

Temperature selection button (PT 8xx1) or the Low

temperature additional option button K (PT 8xx3).

Programmable options, e.g. 0 or 1 are selected with

the START/STOP button.

The Temperature selection LED on time controlled

machines (Profitronic B and B COP) or the Low

temperature additional option LED on residual

moisture controlled machines (Profitronic B Plus)

shows which programmable function is currently

selected.

A short (quick) flash represents one unit, a long

(slow) flash represents ten units.

Example: The 5th Programmable function is repre

sented by the LED flashing five times quickly. The

10th Programmable function is represented by the

LED flashing once slowly. Programmable function

45 is represented by the LED flashing four times

slowly and five times quickly.

Example of reprogramming PT 8251, 8331, 8401

Profitronic B Timed programme machines

P 4 to alter the acoustic tone when a button is

pressed (see "Programmable functions").

Turn the time selection rotary dial three clicks

clockwise.

–

The Temperature selection LED will flash four times

quickly.

–

P will flash alternately with 0 in the segment display

(factory default).

Programmable option 0 = Off - 1 = On.

Pressing the START/STOP button will change the

option to 1.

To save the setting:

Switch the dryer off with the "On/Off" switch.

Example of reprogramming PT 8253, 8333, 8403,

8503, 8803 Profitronic B Plus Residual moisture

programme machines

P 2 to alter the buzzer which sounds at the end of

the programme (see "Programmable functions").

^ Turn the programme selection rotary dial one click

clockwise.

– The Low temperature option LED K will flash twice

quickly.

– P will flash alternately with 1 in the segment display.

Programmable option 0 = Off - 1 = On.

Pressing the START/STOP button will change the

option to 0.

To save the setting:

Switch the dryer off with the "On/Off" switch.

Reprogramming

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Miele PT 8331 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Miele PT 8331

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info