449607
12
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
Function buttons
Pressing the button activates the function
and pressing the button again deactivates it.
f Stop/End
The function button on the right-hand side is
used as the End button after the start of a
programme.
Once it has been pressed the selected
programme is stopped or a programme
which has been stopped is finished.
+i Block plus
The relevant programme block (e.g.
Pre-wash) is added to the programme.
m Starch stop
Press this button if you wish to laundry to be
starched.
k Without spin
Press this button if you do not want the
laundry to be spun after being rinsed.
FC Settings
Press this button to switch to another
language temporarily.
m Start time
Pressing this button before the start of a
programme displays the message that a
start time can be selected.
K Information
Press this button to call up programme
information in the display.
q Water drainage
i Manual control
See the programming instruction booklet.
ü Change order
The order of the programme in progress can
be changed or programme blocks can be
repeated.
A Back
Takes you back to the previous display.
e/- Indicates that there is more
information on next or previous line
S Save
See the programming instruction booklet.
$ Programme locked
Once a locked programme has been
started, the End button can only be used to
stop and cancel it during the first 1 minute.
The programme finishes on the "clean side".
) Programme unlocked
This unlocks a locked programme.
ß Dispensing
ä Dispensing switched off
\ Operating data
If when the drum is empty the load display is
not showing "00,0", you will need to press
the -> I <- button to reset it to 0.
D Data transfer
Supervisor Chip card
The chip card is supplied without any
programmes.
See the Programming Manual for information
on transferring data from the control unit to
the chip card and vice versa.
The chip card can store a maximum of 30
programmes, each with 6 blocks.
The back of the chip card can be labelled.
Description of the machine
12 M.-Nr. 07 511 244
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele PW 6243 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Miele PW 6243

Miele PW 6243 Bedienungsanleitung - Deutsch - 48 seiten

Miele PW 6243 Bedienungsanleitung - Holländisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info