683677
36
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
en
36
Preparing for use
Attach the suction tube (dia. 01)
Fit the suction tube with the square
hole facing upwards into the body of
the vacuum cleaner and twist gently
until it clicks into place.
To detach the suction tube
Press the release button (see detail)
and pull off the tube with a gentle
twist.
Connect the handle to the suction
tube (dia. 02)
Fit the handle with the square hole fa-
cing upwards into the tube and twist
gently until it clicks into position.
To detach the handle from the suction
tube, press the release button and
pull the handle out of the suction
tube, twisting it slightly as you do so.
The handle can also be fitted directly to
the body of the vacuum cleaner (dia.
03).
The vacuum cleaner is then easier to
use, e.g. when vacuuming mattresses,
upholstery etc.
Fitting the floorhead (dia. 04)
Attach the floorhead to the vacuum
cleaner connection stub and twist
gently until it clicks into position.
To remove the floorhead, press the
release button and pull the vacuum
cleaner away from the floorhead
twisting it slightly as you do so.
The suction tube can also be attached
to the vacuum cleaner connection stub
(dia. 05). This is useful for vacuuming
underneath low furniture, for example.
Winding up the mains cable (dia. 06)
When the vacuum cleaner is not in use
the cable can be wound around the two
cable hooks.
Secure the cable by clamping the plug
to the cable (see detail).
Using the accessories supplied
(dia. 07)
Accessory clip
Crevice nozzle
Upholstery nozzle
Accessory clip (dia. 08)
(depending on model)
If required, attach the accessory clip
to the suction tube.
Push the accessory clip down over
the cable hook ring until it clicks into
position.
The accessory clip holds the accessor-
ies (dia. 09).
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
Electrobrush
Turbobrush
These are supplied with their own oper-
ating instructions.
Using the SRD hard floorbrush
(depending on model)
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele Swing H1 EcoLine - SAAP3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info