668695
36
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
How to replace an Active AirClean
filter or an AirClean+ filter (dia. 29 +
30)
Do not use more than one exhaust
filter at a time.
^
Press the button on the rear of the
vacuum cleaner and remove the lid
(dia. 26).
^
Take out the used Active AirClean or
AirClean+ filter.
^
Insert a new Active AirClean or
AirClean+ filter.
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
^ Put the lid back on and close it.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters
(dia. 25):
a AirClean
b Active AirClean (SF-AAC 10)
c AirClean+ (SF H 10)
You can replace the filter supplied with
the vacuum cleaner with one of the
other filters listed above.
Do not use more than one exhaust
filter at a time.
The exhaust filters have different
properties (see "Optional accessories").
When changing the filter please note:
1. If you wish to replace exhaust filter a
with filter b or c, it is essential that you
remove the filter grille from the lid
before you fit the new filter.
2. If you wish to replace exhaust filter b
or c with filter a, it is essential that you
also fit the filter grille * in the lid.
* Filter grille - see "Optional
accessories".
To remove or insert the filter grille
(dia. 31)
^
Grasp inside the hexagons in the
filter grille in the positions shown by
the arrows and squeeze slightly. The
grille can then be removed or
inserted.
When to change the thread lifters
The thread lifters on the suction inlet to
the floorhead can be replaced.
Check them from time to time and
replace them if the pile has worn down.
How to replace the thread lifters
(dia. 32)
^
Use a suitable screwdriver to remove
the thread lifters from the slots.
^
Fit new thread lifters.
Replacement parts are available from
your Miele Dealer or from Miele (see
end of booklet for contact details).
en
36
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

miele-swing-h1-ecoline-plus---hs07

Suche zurücksetzen

  • wie gehen die Räder ab? die räder drehen sich nicht mehr Eingereicht am 22-2-2020 09:45

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele Swing H1 Ecoline Plus - HS07 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info