Bedienungsanleitung Miele T440c Novotronic (Seite 21 von 28) (Englisch)

37972

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Electrical connection

For U.K. only:

This tumble dryer is supplied ready for

connection to an a.c. single phase 230 V,

50 Hz supply. The rated load is 3 kW.

The machine is supplied with a 2 m long

mains cable with moulded plug and the

fuse rating is 13 A. The appliance should

be connected up only by a qualified elec-

trician, in accordance with national and

local safety regulations.

For other countries:

This tumble dryer is supplied ready for

connection to an a.c. single phase 220 V,

60 Hz supply. The rated load is 2.86 kW.

The machine is supplied with a 2 m long

mains cable with moulded plug and the

fuse rating is 16 A. The appliance should

be connected up only by a qualified elec-

trician, in accordance with national and

local safety regulations.

Connection should be made via a

fused plug and a suitable switched

socket which is easily accessible.

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

The voltage, rated load and fuse rating

are given on the data plate. Please en-

sure that these match the household

mains supply.

Important

The wires in the mains lead are coloured

in accordance with the following code:

Green/yellow = earth

Blue = neutral

Brown = live

As the colours of the wires in the mains

lead of this appliance may not corre-

spond with the coloured markings ident-

ifying the terminals in your plug, pro-

ceed as follows:

The wire which is coloured green and

yellow must be connected to the termi-

nal in the plug which is marked with the

letter E or by the earth symbol z or

coloured green or green and yellow.

The wire which is coloured blue must be

connected to the terminal which is marked

with the letter N or coloured black. The

wire which is coloured brown must be

connected to the terminal which is

marked with the letter L or coloured red.

WARNING

THIS APPLIANCE MUST BE EARTHED.

Non-rewireable plugs BS 1363 (U.K.)

If this machine or appliance is fitted

with a non-rewireable plug, the follow-

ing information applies:

If the socket outlets are not suitable for the

plug supplied with this product, it must be

cut off and an appropriate plug fitted. The

plug cut from the flexible cord should be

disposed of and on no account be in-

serted into a 13 A socket elsewhere in the

house (electric shock hazard). The fuse

cover must be refitted when changing the

fuse, and if the fuse cover is lost, the plug

must not be used until a suitable replace-

ment is obtained. The colour of the correct

replacement cover is that of the coloured

insert in the base of the plug, or the colour

that is embossed in words in the base of

the plug (as applicable to the design of

plug fitted). The correct fuse rating of the

replacement fuses that are ASTA ap-

proved to BS 1362 should be fitted. Re-

placement fuse covers may be purchased

from your local electrical suppliers, elec-

tricity showroom, or Miele Service

Agent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Miele T440c Novotronic Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Miele T440c Novotronic

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info