769775
120
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
Settings
120
-Reset
The setting is only visible if
Miele@home is set up.
The WiFi function is deactivated and
the WiFi connection will be reset to
the factory default.
The network configuration should be re-
set whenever a washer-dryer is being
disposed of or sold, or if a used
washer-dryer is being put into opera-
tion. This is the only way to ensure that
all personal data has been removed and
the previous owner will no longer be
able to access the washer-dryer.
A new connection setup has to be car-
ried out in order to use Miele@home
again.
Remote control
The Remote control setting is only vis-
ible if the Miele@home setting is set up
and activated.
If the Miele@mobile App has been in-
stalled on your mobile device, you can
check the status of your washer-dryer
from anywhere and start it remotely.
You can also operate your washer-
dryer remotely with the MobileStart
programme.
You can switch off the Remote control
setting if you do not want to operate the
washer-dryer with your mobile device.
If Remote control is not switched on, the
app can still be used to cancel the pro-
gramme.
Use the “Delay start”sensor to set a
time by which you want to start the
washer-dryer and start the delay start
(see “Delay start/SmartStart”).
The washer-dryer will then start within
the specified timeframe when it receives
your signal.
If it has not received a start signal by
the latest start time set, the washer-
dryer will start automatically.
Remote control is switched off in the
factory default setting.
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
This function can be used for starting
your washer-dryer automatically at a
time when the energy tariff of your en-
ergy supplier is more economical.
Activating SmartGrid gives the Delay
start button a new function.
Set the SmartStart by using the “Delay
start”sensor (see “Delay start/
SmartStart”).
The washer-dryer will then start within
the timeframe specified when it receives
a signal from the energy supplier.
If a signal has not been received from
the energy supplier by the latest start
time set, the washer-dryer will start
automatically.
The SmartGridfunction is switched off in
the factory default setting.
120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele WTW 870 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Miele WTW 870

Miele WTW 870 Bedienungsanleitung - Deutsch - 132 seiten

Miele WTW 870 Bedienungsanleitung - Holländisch - 128 seiten

Miele WTW 870 Bedienungsanleitung - Französisch - 128 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info