773924
9
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
To download the app search for “MillNorway” in Appstore or Google Play and install
the app on your device.
ATTENTION ! The heaters will be connected directly to your WiFi router and it
is therefore important to make sure the router has sufficient capacity for the
number of active devices connected at the same time.
7
millnorway.com
EN
After 3 seconds the display will show "CH", once you see "CH" release and the heater
enables/disables child lock.
Commercial lock
You can enable and disable commercial lock from inside the app.But in addition, you can
enable/disable commercial lock from the heater itself. Turn off the heater using the main
power switch. Turn the heater back on, within 5 seconds press the and hold
After 10 seconds the display will show "CO", once you see "CO" release and the heater
enables/disables commercial lock.
Usage with WiFi connection
A free app is available for downloading for iOS and Android.
By connecting your heaters with the iOS/Android device you can do the following:
Control all your heaters situated in multiple locations . Everything is controlled with
the Mill-app (with same user)
Set up weekly programs (or use the standard program already available in the
app) by using the 4 modes: Comfort, Sleep, Away and OFF
There is no need to edit your program if you get home earlier than normal one day
Enable vacation mode for saving energy while you are away. The app will
automatically increase the temperature in your house before you get back home
Share your house with other family members, making control easy
+ many other things
If internet is down the heater will follow its weekly program which is stored on the heater.
One can easily turn off the WiFi on the heaters and control them manually, so that the
heaters keep an even temperature throughout the whole day and night.
Go to our help desk at millnorway.com for more information or if you have
any questions regarding the Mill app, connecting to WiFi or other relating
questions.
Before use:
Be aware that the Mill app must be installed before you can connect your heaters to your
WiFi network. You can then simply follow the instructions given in the app when connecting
your heaters. The heaters will connect directly to your router via WiFi with 2,4 Ghz mode b/g/n.
Bluetooth is needed for provisioning, so make sure its enabled.
Minimum OS requirement: iOS 8.0 and Android 5.0.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mill CO1200WIFI3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info