677328
11
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
See figure 10 on separate illustration sheet
See figure 11 on separate illustration sheet
9
millheat.com
EN
How to activate nighttime setback
How to activate daytime setback
1. Tuesday 7.30 am you go to the heater and press on the heater’s control panel.
2. “d” will be visible in the display. Use the wheel to set what day it is today when
you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not
programming the heater for the various days. This is simply to tell the heater what
day it is when you are programming the heater, since the daytime setback is active
only Monday-Friday. Select 2 for Tuesday. Confirm by pressing .
3. “C” will flash in the display. Use the wheel to set 17 as the desired temperature for
daytime setback. Confirm by pressing .
4. “H” will flash in the display. Use the wheel to set 7 hours as desired setback period
(meaning it will be active from 7.30 am to 2:30 pm). Confirm by pressing .
5. The daytime setback will now be active from 7.30 am to 2:30 pm Monday-Friday.
Setback temperature is 17 degrees.
* Control light is green when the heater is in an active setback period. The
control light is red when the setback period is inactive but programmed.
1. At 10.00 pm you go to the heater and press on the heater’s control panel.
2. “C” will flash in the display. Use the wheel to set 18 as the desired temperature for
nighttime setback. Confirm by pressing .
3. “H” will flash in the display. Use the wheel to set 8 hours as desired setback period
(meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing .
4. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
* Control light is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and
you will have to do this over again.
Attention! 2012 models (series nr. HL12) have a different set up where you are not asked
to register number of hours and temperature while programming. The standards are as
follows:
Daytime setback: 5 hours and 17 degrees
Nighttime setback: 7 hours and 17 degrees
Besides this they follow the same setup.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mill IB250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Mill IB250

Mill IB250 Bedienungsanleitung - Deutsch - 168 seiten

Mill IB250 Bedienungsanleitung - Deutsch - 17 seiten

Mill IB250 Zusatzinformation - Englisch - 2 seiten

Mill IB250 Bedienungsanleitung - Englisch, Holländisch - 168 seiten

Mill IB250 Bedienungsanleitung und Installationsanweisung - Holländisch - 14 seiten

Mill IB250 Bedienungsanleitung - Französisch, Italienisch, Polnisch - 168 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info