626792
11
Zoom out
Zoom in
Vorherige Seite
1/168
Nächste Seite
9
EN
EXAMPLE:
Let us say you want to program the heater for both daytime- and nighttime setback (normally
the heater is set to 23 degrees). ‚bu want the heater to do the following:
1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17 degrees.
2. Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18
degrees.
How to activate daytime setback
See figure 10 on separate illustration sheet
1. Tuesday 7.30 am you go to the heater and presson the heater‘s control panel.
2. “d” will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (1= Monday, 2 = Tuesday etc.) ‚bu are not pro-
gramming the heater for the various days. This is simply to tell the heater what day it is
when you are programming the heater. Select 2 for Tuesday. Confirm by pressing
3. “C” will flash in the display. Use the + and - buttons to set 17 as the desired temperatu-
re for daytime setback. Confirm by pressing
4. “H” will flash in the display. Use the + and - buttons to set 7 hours as desired setback
period (meaning it will be active from 7.30 am to 230 pm). Confirm by pressing
5. The daytime setback will now be active from 7.30 am to 230 pm every day. Setback
temperature is 17 degrees.
*Control lightis green when the heater is in an active setback period. The control light is
red when the setback period is inactive but programmed.
How to activate nighttime setback
See figure 11 on separate illustration sheet
1. Tuesday 10.00 pm you go to the heater and presson the heater‘s control panel.
2. “d” will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (l=Monday), 2 = Tuesday etc.). You are not
programming the heater for various days. This is simply to tell the heater what day it is
when you are programming the heater. Select 2 for Tuesday. Confirm by pressing
3. “C” will flash in the display. Use the + and - buttons to set 18 as the desirectfemperatu-
re for nighttime setback. Confirm by pressing
4. “H” will flash in the display. Use the + and - buttons to set 8 hours as desired setback
period (meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing
5. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
*Control light(! is green when the heater is in an active setback period. The control light is red
when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and you will
have to do this over again.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mill MB1000L DN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Mill MB1000L DN

Mill MB1000L DN Bedienungsanleitung und Installationsanweisung - Deutsch - 17 seiten

Mill MB1000L DN Zusatzinformation - Englisch - 2 seiten

Mill MB1000L DN Bedienungsanleitung und Installationsanweisung - Englisch - 15 seiten

Mill MB1000L DN Bedienungsanleitung und Installationsanweisung - Holländisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info