770593
11
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
How to activate nighttime setback
1.Tuesday 10.00 pm you go to the heater and press on the heater’s control panel.
2. "d" will be visible in the display. Use the + and - buttons to set what day it is today when
you are programming the heater (1=Monday), 2 = Tuesday etc.). You are not program-
ming the heater for various days. This is simply to tell the heater what day it is when you
are programming the heater. Select 2 for Tuesday. Confirm by pressing .
Advanced mode
If you want to have different temperature settings each day, you may use advanced mode. To
activate advanced mode you need to activate day and night setback first.
See figure 18 on seperate illustration sheet.
How to activate advanced mode for daytime setback:
1. Press and hold , then press + one time.
2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for
Monday. Confirm by pressing .
3. “°C” will flash in the display. Use the + and - buttons to set the temperature for daytime setback.
Confirm by pressing .
4. “H” will flash in the display. Use the + and - buttons to set the number of hours as desired setback
period. Confirm by pressing .
5. “SR” will be visible in the display. Now you have the option to set the time of day that you want
the setback time to start. You may choose from -4 hours to +4 from the time your daytime setback
normally starts. Meaning, if your daytime setback normally starts at 10:30, but you want the setback
time to be activated 08:30 every Monday, you may use the - button to set “-2” (hours). Confirm by
pressing
6. “d2” (day 2) which is Tuesday, will now be visible in the display and you may do the same
procedure to set the desired temperature for Tuesday. Keep repeating the same procedure for all 7
days.
How to activate advanced mode for nighttime setback:
1. Press and hold , then press + one time.
2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for
Monday night. Confirm by pressing .
3. “°C” will flash in the display. Use the + and - buttons to set the temperature for nighttime setback.
Confirm by pressing
5.The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
* Control light is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and
you will have to do this over again.
3. “C” will flash in the display. Use the + and - buttons to set 18 as the desired temperature for
nighttime setback. Confirm by pressing .
4. “H” will flash in the display. Use the + and - buttons to set 8 hours as desired setback period
(meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing .
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mill MB1050L DN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info