Bedienungsanleitung Mill MB700DN (Seite 11 von 68) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

770589

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

How to activate nighttime setback

1.Tuesday 10.00 pm you go to the heater and press on the heater’s control panel.

2. "d" will be visible in the display. Use the + and - buttons to set what day it is today when

you are programming the heater (1=Monday), 2 = Tuesday etc.). You are not program-

ming the heater for various days. This is simply to tell the heater what day it is when you

are programming the heater. Select 2 for Tuesday. Conﬁrm by pressing .

Advanced mode

If you want to have diﬀerent temperature settings each day, you may use advanced mode. To

activate advanced mode you need to activate day and night setback ﬁrst.

See ﬁgure 18 on seperate illustration sheet.

How to activate advanced mode for daytime setback:

1. Press and hold , then press + one time.

2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for

Monday. Conﬁrm by pressing .

3. “°C” will ﬂash in the display. Use the + and - buttons to set the temperature for daytime setback.

Conﬁrm by pressing .

4. “H” will ﬂash in the display. Use the + and - buttons to set the number of hours as desired setback

period. Conﬁrm by pressing .

5. “SR” will be visible in the display. Now you have the option to set the time of day that you want

the setback time to start. You may choose from -4 hours to +4 from the time your daytime setback

normally starts. Meaning, if your daytime setback normally starts at 10:30, but you want the setback

time to be activated 08:30 every Monday, you may use the - button to set “-2” (hours). Conﬁrm by

pressing

6. “d2” (day 2) which is Tuesday, will now be visible in the display and you may do the same

procedure to set the desired temperature for Tuesday. Keep repeating the same procedure for all 7

days.

How to activate advanced mode for nighttime setback:

1. Press and hold , then press + one time.

2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for

Monday night. Conﬁrm by pressing .

3. “°C” will ﬂash in the display. Use the + and - buttons to set the temperature for nighttime setback.

Conﬁrm by pressing

5.The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The

setback temperature is 18 degrees.

* Control light is green when the heater is in an active setback period. The control

light is red when the setback period is inactive but programmed.

N.B! If a power cut occurs/you turn oﬀ the heater, the programming will be lost and

you will have to do this over again.

3. “C” will ﬂash in the display. Use the + and - buttons to set 18 as the desired temperature for

nighttime setback. Conﬁrm by pressing .

4. “H” will ﬂash in the display. Use the + and - buttons to set 8 hours as desired setback period

(meaning it will be active from 22.00 pm to 6.00 am). Conﬁrm by pressing .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mill MB700DN Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info