Bedienungsanleitung Milwaukee 9081-20 (Seite 5 von 15) (Englisch, Französisch, Spanisch)

641637

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

8 9

WARNING!

OPERATION

Using the Forward/Reverse Switch

The forward/reverse switch may be set to

three positions: forward, reverse and lock.

Due to a lockout mechanism, the forward/

reverse switch can only be adjusted when

the trigger is not pressed. Always allow the

motor to come to a complete stop before

using the forward/reverse switch.

1. For forward (clockwise) rotation, push

the forward/reverse switch in the direc-

tion shown. Check the direction of rota-

tion before use.

2. For reverse (counterclockwise) rotation,

push the forward/reverse switch in the

direction shown. Check the direction of

rotation before use.

3. To lock the trigger, push the forward/re-

verse switch to the center position. The

trigger will not work when the forward/

reverse switch is in the locked position.

Always lock the trigger or remove the

battery pack before performing mainte-

nance, changing accessories, storing

the tool and any time the tool is not in

use.

Starting, Stopping and Controlling

Speed

These tools may be operated at any speed

from 0 to full speed.

1. To start the tool, pull the trigger.

2. To vary the driving speed, simply in-

crease or decrease pressure on the

trigger. The further the trigger is pulled,

the greater the speed.

3. To stop the tool, release the trigger

and the electric brake stops the tool

instantly.

Impacting Techniques

The longer a bolt, screw, or nut is impacted,

the tighter it will become. To help prevent

damaging the fasteners or workpieces,

avoid excessive impacting. Be particularly

careful when impacting smaller fasteners

because they require less impacting to reach

optimum torque.

Practice with various fasteners, noting the

length of time required to reach the desired

torque. Check the tightness with a hand-

torque wrench. If the fasteners are too tight,

reduce the impacting time. If they are not

tight enough, increase the impacting time.

Impacting for two seconds is generally

sufﬁ cient for a 3/8" bolt and one second

for a 5/16" bolt. However, oil, dirt, rust or

other matter on the threads or under the

head of the fastener affects the degree of

tightness.

The torque required to loosen a fastener

averages 75% to 80% of the tightening

torque, depending on the condition of the

contacting surfaces.

On light gasket jobs, run each fastener down

to a relatively light torque and use a hand

torque wrench for ﬁ nal tightening.

To reduce the risk of injury, wear

safety goggles or glasses with side

shields.

Forward

Reverse

Fig. 6

Cleaning

Clean dust and debris from charger and tool

vents. Keep tool handles clean, dry and free

of oil or grease. Use only mild soap and a

damp cloth to clean the tool, battery pack

and charger since certain cleaning agents

and solvents are harmful to plastics and other

insulated parts. Some of these include gaso-

line, turpentine, lacquer thinner, paint thinner,

chlorinated cleaning solvents, ammonia and

household detergents containing ammonia.

Never use ﬂ ammable or combustible sol-

vents around tools.

WARNING

To reduce the risk of injury,

always unplug the charger and

remove the battery pack from

the charger or tool before

performing any maintenance.

Never disassemble the tool,

battery pack or charger. Contact a

MILWAUKEE service facility for ALL

repairs.

Keep your tool, battery pack and char-

ger in good repair by adopting a regular

maintenance program. After six months

to one year, depending on use, return the

tool, battery pack and charger to a

MILWAUKEE service facility for:

• Lubrication

• Mechanical inspection and cleaning

(gears, spindles, bearings, housing,

etc.)

• Electrical inspection (battery pack,

charger, motor)

• Testing to assure proper mechanical and

electrical operation

Maintaining Tool

If the tool does not start or operate at full pow-

er with a fully charged battery pack, clean

the contacts on the battery pack. If the tool

still does not work properly, return the tool,

charger and battery pack, to a MILWAUKEE

service facility for repairs.

MAINTENANCE

WARNING

To reduce the risk of personal injury

and damage, never immerse your

tool, battery pack or charger in liquid

or allow a liquid to ﬂ ow inside them.

Repairs

For repairs, return the tool, battery pack and

charger to the nearest service center listed on

the back cover of this operator's manual.

ACCESSORIES

Always remove battery pack before

changing or removing accessories.

Only use accessories speciﬁ cally

recommended for this tool. Others

may be hazardous.

WARNING

For a complete listing of accessories refer to

your MILWAUKEE Electric Tool catalog or go

on-line to www.milwaukeetool.com. To obtain

a catalog, contact your local distributor or a

service center listed on the back cover of this

operator’s manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Milwaukee 9081-20 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info