Bedienungsanleitung Milwaukee 9082-20 (Seite 3 von 15) (Englisch, Französisch, Spanisch)

641638

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

4 5

POWER TOOL USE AND CARE

16. Do not force the power tool. Use the

correct power tool for your applica-

tion. The correct power tool will do the

job better and safer at the rate for which

it was designed.

17. Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

18. Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preven-

tive safety measures reduce the risk of

starting the tool accidentally.

19. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tools or

these instructions to operate power

tools. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool's operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

21. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

22. Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

SERVICE

28. Have your power tool serviced by a

qualiﬁ ed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

23. Ensure the switch is in the off posi-

tion before inserting battery pack.

Inserting the battery pack into power

tools that have the switch on invites

accidents.

24. Recharge only with the charger speci-

ﬁ ed by the manufacturer. A charger

that is suitable for one type of battery

pack may create a risk of ﬁ re when used

with another battery pack.

BATTERY TOOL USE AND CARE

SPECIFIC SAFETY RULES

25. Use power tools only with speciﬁ cally

designated battery packs. Use of any

other battery packs may create a risk of

injury and ﬁ re.

26. When battery pack is not in use, keep

it away from other metal objects like

paper clips, coins, keys, nails, screws,

or other small metal objects that can

make a connection from one terminal

to another. Shorting the battery terminals

together may cause burns or a ﬁ re.

27. Under abusive conditions, liquid may

be ejected from the battery, avoid

contact. If contact accidentally oc-

curs, ﬂ ush with water. If liquid con-

tacts eyes, additionally seek medical

help. Liquid ejected from the battery

may cause irritation or burns.

1. Maintain labels and nameplates.

These carry important information.

If unreadable or missing, contact a

MILWAUKEE service facility for a free

replacement.

2. WARNING! Some dust created by

power sanding, sawing, grinding, drill-

ing, and other construction activities

contains chemicals known to cause

cancer, birth defects or other reproduc-

tive harm. Some examples of these

chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this

type of work. To reduce your exposure

to these chemicals: work in a well ven-

tilated area, and work with approved

safety equipment, such as those dust

masks that are specially designed to

ﬁ lter out microscopic particles.

FUNCTIONAL DESCRIPTION

Cat. No. 9082

1. 3/8" square drive shank

2. Forward/reverse switch

3. Trigger

4. Battery pack

5. Battery pack release button

6. Hex drive chuck

7. 1/2" square drive shank

Cat. No. 9083

Cat. No. 9081

Symbology

Volts Direct Current

Impacts per Minute

Under Load (IPM)

Underwriters

Laboratories, Inc.

IPM

0-3300

0-3500

Catalog

No.

9081-20

9082-20

9083-20

Average

Torque

Output

740 in-lbs.

1056 in-lbs.

1404 in-lbs.

Volts

14.4

Speciﬁ cations

Drive

Shank

1/4" Hex

3/8" Square

1/2" Square

RPM

0-2600

Type

Impact Driver

Impact Wrench

3. Wear ear protectors with impact

drills. Exposure to noise can cause

hearing loss.

4. Hold power tools by insulated grip-

ping surfaces when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a “live” wire will make ex-

posed metal parts of the tool “live” and

shock the operator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Milwaukee 9082-20 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info