Bedienungsanleitung Minimoka CM-1866 (Seite 14 von 24) (Englisch, Französisch, Portugiesisch, Spanisch)

727617

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

coffee cups can be warmed by placing them upside

down on the cup warming plate.

Preparing an Espresso:

-Place one or two pre-heated cups below the pouring

spouts.

-Turn the operating dial to the espresso setting. You

will hear the machine making a pumping noise, this is

normal.

Oncethecup/sarelledtothedesiredlevel,turnthe

operating dial to the off (O) position

Removethelterholderandthelterbyturningthelter

holder handle to the left.

Toremovetheusedcoffeegrindsfromthelter,simply

turn the group handle upside down in a bin and gently

tap out the coffee.

-After each use of the espresso machine for best result

when making consecutive cups of espresso, we recom-

mendthatyouushasmallamountofwaterthrough

themachinewiththelterholderalreadyremovedfrom

the brewing head. Simply turn the operating dial to the

espresso setting and allow the water to run through until

youhaveaconsistentowofwater.Thiswillwashout

any old or used coffee grinds stuck to underside of the

brewing head and also help ensure the correct water

temperature for your next shot of espresso.

Note:Donotleavethelterholderlockedinpositionfor

extended periods, or when machine is not in use. This

shorten the life of brew head rubber seal.

Obtaining steam

The steam function can be used for frothing milk.

Important: There is risk of scalding when the steam

nozzle is in use. Hot water or hot steam can cause

scalding. Only use the steam wand when it is immersed

in the milk.

-Fill the water reservoir with cold water and start the unit.

-Position the steam wand so that the tip is over the drip

tray.

-Turn the dial to the steam position. Some water will

come out to the steam wand. Once steam start to come

out turn the dial to the off (O) position.

-Swing the steam nozzle to the side of the machine.

Pour cold milk into a stainless steel jug no more than

1/3 full.

Tips: For best results, we recommend using refrigerated

milk and a stainless steel jug that is well chilled. Be sure

not to rinse the jug with warm water before use.

-Hold the jug under the steam wand so that the nozzle

opening is completely immersed in the milk. Turn the

operating dial to the steam setting to activate the steam

and commence texturing milk.

-Angle jug so the steam wand is resting on the spout of

the jug and position the tip of the steam wand just below

the surface of the milk.

Note: The nozzle must not touch the bottom of the jug to

ensure that the steam release is not obstructed.

-Move the jug so that the steam wand is in the centre,

this is will create a whirlpool motion to the milk. As the

steam heats the milk, the milk will begins to rise. Follow

the level of the milk by lowering the jug, always keeping

the tip of the steam nozzle just below the surface.

When the milk is ate temperature close the steam by

turning the dial to the off (O) position.

Note: Do not boil the milk.

Once you have nished using the appliance:

- Stop the appliance by pressing the on/off button

- Unplug the appliance from the mains.

- Remove the water from the water tank.

- Clean the appliance.

Cleaning

- Disconnect the appliance from the mains and allow it to

cool before undertaking any cleaning task.

- Clean the equipment with a damp cloth with a few

drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or base

pH such as bleach, or abrasive products, for cleaning the

appliance.

- It is advisable to clean the appliance regularly and

remove any food remains.

- If the appliance is not in good condition of cleanliness,

its surface may degrade and inexorably affect the

duration of the appliance’s useful life and could become

unsafe to use.

- Neither parts of this appliance are suitable for cleaning

in the dishwasher.

- Then dry all parts before its assembly and storage.

How to deal with lime scale incrustations:

-We recommend that you descale your machine every

2-3 months, although this period will depend on the hard-

ness of water and frequency of use of the machine.

- For the appliance to work correctly it should be kept

free of limescale or magnesium incrustations caused by

the use of hard water.

- To prevent this kind of problem, we recommend the use

of water with low lime or magnesium mineralisation.

Anomalies and repair

- Take the appliance to an authorised technical support

service if product is damaged or other problems arise.

Do not attempt to disassemble or repair the appliance

yourself as this may be dangerous.

For EU product versions and/or in case that it is reques-

ted in your country:

Ecology and recyclability of the product

- The materials of which the packaging of this appliance

consistsareincludedinacollection,classicationand

recycling system. Should you wish to dispose of them,

use the appropriate public recycling bins for each type

of material.

- The product does not contain concentrations of

substances that could be considered harmful to the

environment.

Manual CM1866.indb 14 10/02/14 15:23

Minimoka CM-1866 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info