54
For proper and safe use
Read and understand all warnings and cautions before using this product.
WARNING
• Use only within the voltage range specified on the unit. Inappropriate current may
cause damage or injury through fire or electric shock.
• Use only the specified AC adapter (Ya Hsin Industrial 092-240840) within the voltage
range indicated on the adapter unit. An inappropriate adapter or current may cause
damage or injury through fire or electric shock.
• Do not disassemble this product. Electric shock may cause injury if a high-voltage
circuit inside the product is touched. Take the product to a Konica Minolta service
facility when repairs are required.
• Immediately unplug the unit and discontinue use if the product is dropped or
subjected to an impact in which the interior is exposed. The continued use of a
damaged product may cause injuries or fire.
• Store this product out of reach of children. Be careful when around children not to
harm them with the product or parts.
• Do not operate this product or handle the power cord with wet hands. Do not place
a container with liquid near the product. If liquid comes in contact with the product,
immediately unplug the unit. The continued use of a product exposed to a liquid
may cause damage or injury through fire or electric shock.
• Do not insert hands, inflammable objects, or metal objects such as paper clips or
staples into this product. It may cause damage or injury through fire or electric
shock. Discontinue use if an object enters the product.
• Do not use the product near inflammable gases or liquids such as gasoline, benzine,
or paint thinner. Do not use inflammable products such as alcohol, benzine, or paint
thinner to clean the product. The use of inflammable cleaners and solvents may
cause an explosion or fire.
• When unplugging the unit, do not pull on the power cord. Hold the adapter unit
when removing it from an outlet.
• Do not damage, twist, modify, heat, or place heavy objects on the power cord. A
damaged cord may cause damage or injury through fire or electric shock.
• If the product emits a strange odor, heat, or smoke, discontinue use. Immediately
unplug the product. The continued use of a damaged product or part may cause
injuries or fire.
• Take the product to a Konica Minolta service facility when repairs are required.
This mark certifies that this product meets the requirements of the EU
(European Union) concerning interference causing equipment regulations. CE
stands for Conformité Européenne.
As an Energy Star® Partner, Konica Minolta has determined that this product
meets the Energy Star® guidelines for energy efficiency.
CAUTION
• Damage or injury through fire or electric shock may result if the product is used or
stored in the following conditions:
• In humid or dusty environments
• In direct sunlight or hot environments
• In smoky or oily areas
• In unventilated areas
• On unstable or unlevel surfaces
• This product should only be operated in the upright position. Inappropriate
placement may result in fire.
• Insert the plug securely into the electrical outlet.
• Do not use if the cord is damaged.
• Do not connect the ground to a gas pipe, telephone ground, or water pipe. Improper
grounding can result in injury from electric shock.
• Do not cover the AC adapter. A fire may result.
• Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit
in emergencies.
• Unplug the product when cleaning or when the unit is not in use for long periods.
• Periodically check that the power cord is not damaged and the plug is clean. Dust
and dirt that may collect between the prongs of the plugs may result in fire.
For proper and safe use
FCC Compliance Statement
Declaration on Conformity
Responsible Party: Konica Minolta Photo Imaging U.S.A. Inc.
Address: 725 Darlington Avenue, Mahwah, NJ 07430
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not approved by the party responsible for compliance could void the user's
authority to operate the equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installa-
tion.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Do not remove the ferrite cores from the cables.
This Class B digital apparatus complies with Canadian ICES-003.
The sound pressure level is less than 70dB according to ISO 3744 or ISO 7779.
DiMAGE Scan Elite 5400 II
