4342
FOR OWNERS OF THE QUARTZ DATE MODEL
1. Open the back cover.
3. Remove the old battery and
replace it with a new one.
• The + side should face up.
2. Using a coin or similar
object, turn the battery cover
counter-clockwise, then
remove it.
4. Replace the battery cover,
then reset the date and time.
Replacing the Battery
The quartz data back uses a CR2025 lithium battery, located on the
inside of the back cover. Replace the battery if the display or
imprinted data becomes dim.
1. Press the mode button to choose
the data imprinting format.
• M will appear above the month.
2. Use the select button (SEL) to
move between different parts of
the displayed data.
• The selected part will blink, indicating that it
is the data to be changed.
3. Press the adjust button (ADJ) to
change the data to the correct
value.
• Data continues changing as long as the
button is held down.
• In time mode, pressing the ADJUST button
while : is blinking resets the seconds counter
to zero (not shown).
Setting the Date/Time
4. When all data is correct, press
the select button (SEL) until the
data stops blinking.
