47
1. Number of photos
2. Number of videos
3. Free memory space
4. Battery charge level
Press the menu button (13) to access the main menu again.
Connecting the camera to a computer
There are two ways of transferring the data to your com-
puter: either you can take out the SD card and read it on
the computer or you can connect the DTC 400 to your
computer using the supplied USB cable.
Connecting using the USB cable
Always ensure that the camera is switched off (main
switch (12) in centre position (“OFF”)) before you connect
it to your computer. Connect your camera to the computer
using the supplied USB cable via the USB cable slot (14).
Switch the camera to “Setup mode” (main switch (12) in
top position (“SETUP”)). The camera will be recognized
as a removable medium – pictures or video clips can be
directly viewed or transferred to the PC.
Transferring pictures and videos via SD card
Always ensure that the camera is switched off (main
switch (12) in centre position (“OFF”)) before the SD card
is removed from the camera slot (15), otherwise the mem-
ory could be damaged. Take the memory card from the slot
(15) in the camera and insert it in the memory card reader
