27
mode (main switch (11) in middle position). If the DTC
600 emits an acoustic signal this means that there is
either no memory card inserted, the memory card is
not inserted correctly or it is not compatible. The mes-
sage “NO SD CARD” appears on the LCD screen in red.
If you do not hear an acoustic signal you can proceed
with the camera set up procedure.
Language setting
The default language setting of your DTC 600 is English.
To change the default language setting for the display,
follow these instructions:
1. Switch your DTC 600 camera to SET UP mode (main
switch to the middle position).
2. After approx. 5 seconds, the main menu will appear in
English with „Live Preview“ highlighted in dark blue.
3. Push the Up button once.
4. You are now in the „Language“ menu highlighted
in dark blue.
5. Push the OK button once.
6. Using the Up and Down buttons, choose the language
you would like to use (highlighted in light blue)..
7. Push the OK button once.
8. You are now at the top of the main menu in the se-
lected language.
Mounting the camera
1. Mounting strap
On the back of the camera there are two mounting
brackets (16) for fixing the camera with a strap. Pass
the mounting strap included in the scope of delivery
through the two brackets. Fasten the camera using the
buckle on the mounting strap. Additionally the camera
can be secured with a standard safety harness.
2. Tripod
On the back of the camera on the outside there is a 14“
tripod thread (17) for mounting the camera on a tripod.
