Bedienungsanleitung Minox DTC 700 (Seite 36 von 60) (Deutsch, Englisch, Französisch)

625816

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Default factory setting

With this, you can restore your DTC 700 settings

to factory settings. Go to the “Main Menu” by

pressing the menu button (8) and select the menu

option “Default Settings”. This is located under the

second tab “General Settings”. Press the OK but-

ton (9) or the right arrow button (10) to access the

submenu. You can select “Yes” or “No” using the

Up/Down arrow keys (10) and conﬁrm with OK (9).

Select “No” to retain the existing settings and the

camera will return to the previous menu selection.

If you choose “Yes”, your DTC 700 shall be restored

to the factory settings and revert to the second tab

“General Settings” in the “Main Menu”.

Camera data

Go to the “Main Menu” by pressing the menu

button (8) and select the menu option “Camera

info”. This is located under the second tab “General

Settings”. You can access the submenu by pressing

the OK button (9) or the right arrow key (10). In

the submenu, you can use the Up/Down arrow key

(10) and select from the following data stored in

your camera; Saved ﬁles, memory space, ﬁrmware

version.

Saved ﬁles

Go to the submenu on the menu option “Saved ﬁ-

les” and press the OK button (9) or the right arrow

key (10). After that, the actual number of photo and

video ﬁles will be displayed. Conﬁrm using the OK

button (9) or the left arrow key (10) to return to

the Start Menu.

Memory space

Go to the menu option “Memory” in the submenu

and press the OK button (9) or the right arrow key

(10). Subsequently, “Used memory space” and

“free memory space” will be indicated. Press the

OK button (9) or the left arrow key (10) to conﬁrm

and return to the Start menu.

Firmware Version

Go to the menu option “Firmware Version” in the

submenu and press the OK button (9) or the right

arrow key (10). You will then be shown the current

Firmware Version. Conﬁrm with OK (9) or using the

left arrow key (10) to return to the Start menu.

Software updates

If an update is available for your DTC 700, plea-

se proceed as follows: Make sure your DTC 700 is

switched off (“OFF” function: Main Switch (11), lo-

wer position). Copy all the ﬁles needed for updating

directly onto a formatted SD card. Insert the SD card

into your DTC 700 as 33 described in the section

“Using the memory card”. Bring your camera into

the “SETUP” mode (Main Switch (11), centre). Go

to the Main Menu by pressing the menu button

(8) and select the menu option “Updates”. This

is located under the tab “General Settings”. Press

the OK button (9) to access the submenu. Using

the Up/Down arrow keys, you can select “Yes” or

“No” and conﬁrm with OK. Select “No” to retain

the existing software version and the camera will

return to the previous menu selection. If you select

“Yes”, your DTC 700 will begin installing the up-

dates. The update installation is completed once

your camera screen turns black. Please switch your

DTC 700 now to “OFF” function: Main Switch, lo-

wer position. When you switch on the camera the

next time in the “SETUP” mode, Main Switch (11),

centre, the new software is ready for use. Press the

left arrow key (10) to return to the previous menu

without installing the updates.

Note:

Choose alkaline if using lithium batteries.

Press the OK button (9) to save the settings. The

camera will automatically return to the Start menu.

You will return to the previous menu without any

changes to the settings by pressing the left arrow

key (10).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Minox DTC 700 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info