Bedienungsanleitung Miomare WU6823511-8 - IAN 360514 (Seite 8 von 31) (Deutsch, Englisch, Holländisch, Französisch)

785733

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

8 GB/IE/NI

Installation

Please familiarise yourself with the product prior

to installation. Carefully read the following in-

stallation instructions and safety advice. Incorrect

installation will void the warranty, particularly

with respect to consequential damages.

CAUTION! Turn oﬀ the water supply at the

mains before starting the installation. Other-

wise there is a risk of injury and / or property

damage.

Note: You will need an electric drill.

DANGER OF ELECTRIC SHOCK!

Before drilling, ensure that there are

no electrical cables where you in-

tend to drill.

CAUTION! RISK OF INJURY!

Read the operating instructions in-

cluded with your drill.

Note: Before installation, remove all packag-

ing material from the product.

Twist the pre-installed installation plates 17

counterclockwise to remove them from the wall

bracket 15 (see Fig. A).

First push the wall bracket

and then the hand-

hel

d shower head holder 19 and the second

wall bracket 15 over the shower bar 1 from

below (see Figures B to D).

Remove the connector 14 together with the brass

thread 13 from the diverter 9 (see Fig. E).

Attach the brass thread 13 with the connector

14 to the bottom of the shower bar 1 by tight-

ening it counterclockwise using the tool 11

(see Fig. F).

Attention: Left-hand thread!

Twist the diverter 9 clockwise onto the brass

thread 13 and when doing so make sure that

the seal 12 is correctly positioned (see Fig. G).

Adjust the spacing on the left and right between

the two wall brackets 15 and the handheld

shower head holder 19 on the shower bar 1,

and use a slot-head screwdriver (not included)

to tighten the screws on the shower bar 1 in

order to attach the wall brackets 15 (see Fig-

ures H and I).

Mark the drill holes using the holes in the instal-

lation plates 17 intended for the ﬁxing screws

16 as a guide (approx. Ø 6 mm).

Now drill the mounting holes and then guide the

wall plugs 18 into the drilled holes (see Fig. J).

Attach both installation plates 17 using the ﬁx-

ing screws 16 .

Hold the shower bar 1 with the installed wall

brackets 15 at the height of the installation

plates 17 . Put the covering rosettes for the wall

brackets 15 on the installation plates 17 and

turn the covering rosettes clockwise to tighten

(see Figures K and L). The diverter 9 must face

downwards when you do this.

Insert a hose seal 7 into the thread of the

connection hose 10 and attach the connection

hose 10 by twisting it clockwise onto the lower

thread of the diverter

(see Figures M and N).

Insert a hose seal 7 into the other end of the

connection hose 10 and screw this tightly onto

your water supply by hand.

Insert a hose seal 7 into the nut of the shower

hose 8 and attach this by twisting it clockwise

onto the side thread of the diverter 9 (see Fig-

ures O and P).

Attach a hose seal 7 to the other end of the

shower hose 8. Then connect the handheld

shower head 6 to the shower hose 8 by

tightening it by hand in a clockwise direction

(see Fig. Q).

Now remove the union nut 2 on the overhead

shower head 5 by twisting it counterclockwise

(see Fig. R).

Insert a seal 3 into the thread on the ball

joint 4.

Insert the ball joint 4 into the union nut 2

from below (see Fig. S).

Insert the seal 3 into the overhead shower

head 5 and screw the ball joint 4 together

with the union nut 2 clockwise onto the over-

head shower head 5 (see Figures T and U).

Attach the overhead shower head 5 by twist-

ing it clockwise onto the shower bar 1 (see

Fig. V).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Miomare WU6823511-8 - IAN 360514 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info