Bedienungsanleitung Mitsubishi EW270U (Seite 30 von 55) (Englisch)

493683

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

EN-30

Hiding the image

In order to draw the audience's full attention to the presenter, you can use

BLANK on the projector or remote control to hide the screen image. Press any

key on the projector or remote control to restore the image. The word 'BLANK'

appears at the lower right corner of the screen while the image is hidden.

You can set the blank time in the SYSTEM SETUP: Basic > Blank Timer

menu to let the projector return the image automatically after a period of time

when there is no action taken on the blank screen.

Once BLANK is pressed, the projector enters Low mode automatically.

Do not block the projection lens from projecting as this could cause the blocking

object to become heated and deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings from being changed

accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate

except POWER.

1. Press on the projector or remote control or go to the SYSTEM

SETUP: Basic > Panel Key Lock menu, and select On by pressing /

on the projector or remote control.

2. A confirmation message is displayed. Select Yes to confirm.

To release panel key lock, press any key of the projector once to display the

panel key lock warning. With the warning being displayed, press on the

projector or remote control again. (Press and hold the key on the projector for 3

seconds.)

You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock and press / to

select Off.

• Keys on the remote control are still in use when panel key lock is enabled.

• If you press POWER to turn off the projector without disabling panel key lock, the projector will still be in locked status

the next time it is turned on.

Freezing the image

Press FREEZE on the remote control to freeze the image. The word

'FREEZE' will be displayed in the upper left corner of the screen. To release

the function, press any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures are running on the video

or other device. If the connected devices have active audio output, you will

still hear the audio even though the image is frozen on screen.

Do not keep displaying a still picture for an extended period of time, as the

afterimages may linger on the screen.

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct

connection to the projector audio input. See "Connection" on page 14 for how the audio input is connected.

Muting the sound

To temporarily turn off the sound:

1. Press MENU/EXIT and then press / until the SYSTEM SETUP:

Advanced menu is highlighted.

2. Press to highlight Audio Settings and press MODE/ENTER. The

Audio Settings page is displayed.

3. Highlight Mute and press / to select On.

Adjusting the sound level

To adjust the sound level, press VOLUME +/- on the remote control, or:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi EW270U Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info