Bedienungsanleitung Mitsubishi EX241U (Seite 11 von 59) (Englisch)

549871

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

EN-11

ENGLISH

Positioning your projector

Choosing a location

Your room layout or personal preference will dictate which installation location you select. Take into consideration

the size and position of your screen, the location of a suitable power outlet, as well as the location and distance

between the projector and the rest of your equipment.

Your projector is designed to be installed in one of the possible installation locations:

For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation.For

details, consult your dealer.

• The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount

kit or installation of the ceiling mount kit in an improper location.

• When the projector is mounted on the ceiling, images may appear darker than those projected in the case of

tabletop mounting. This isn’t a product malfunction.

• Be sure to use this projector at an altitude of less than 1500 meters.

• Installation must be done by a qualified professional.

When the projector is installed on the ceiling using the ceiling mount kit, it is recommended to hold the mount kit and the

projector using metal bars or wires in addition to the mount kit fixing screws to prevent the projector from falling due to

an earthquake or other cause. For that purpose, use metal bars, wires, or screws that bear a load of at least 70 kgf. When

using metal wires, secure one end to a screw hole marked with an arrow on the rear terminal panel and the other end to

the mount kit. (Do not use screw holes without arrow marks.) In this case, make sure that the screws are inserted in the

projector at least 5 mm. The length of the screws should be 20 mm or shorter. Also make sure that no electrical current is

flowing in the mount kit due to current leakage or other cause.

1. Front Table

Select this location with the projector placed near the

floor in front of the screen. This is the most common way

to position the projector for quick setup and portability.

2. Rear Table

Select this location with the projector placed near the

floor behind the screen.

Note that a special rear projection screen is required.

Set Rear Table in the SYSTEM SETUP: Basic >

Projector Position menu after you turn the projector on.

3. Rear Ceiling

Select this location with the projector suspended upside-

down from the ceiling behind the screen.

Note that a special rear projection screen and qualified

projector ceiling mount kit are required for this

installation location.

Set Rear Ceiling in the SYSTEM SETUP: Basic >

Projector Position menu after you turn the projector on.

4. Front Ceiling

Select this location with the projector suspended upside-

down from the ceiling in front of the screen.

Purchase a qualified projector ceiling mount kit from

your dealer to mount your projector on the ceiling.

Set Front Ceiling in the SYSTEM SETUP: Basic >

Projector Position menu after you turn the projector on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi EX241U Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info