Bedienungsanleitung Mitsubishi EX241U (Seite 24 von 59) (Englisch)

549871

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

EN-24

Password: __ __ __ __ __ __

Keep this number in a safe place.

5. Confirm the new password by re-entering the new password.

6. You have successfully assigned a new password to the projector. Remember to enter the new password next time

the projector is started.

7. To leave the OSD menu, press MENU/EXIT.

Disabling the password function

To disable password protection, go back to the SYSTEM SETUP: Advanced > Security Settings > Power on lock

menu after opening the OSD menu system. Select Off by pressing / . The message 'INPUT PASSWORD' is

displayed. Enter the current password.

• If the password is correct, the OSD menu returns to the Security Settings page with 'Off' shown in the row of

Power on lock. You will not have to enter the password next time you turn on the projector.

• If the password is incorrect, the password error message is displayed lasting for three seconds, and the message

'INPUT PASSWORD' is displayed for your retry. You can press MENU/EXIT to cancel the change or try

another password.

Though the password function is disabled, you need to keep the old password in hand should you ever need to re-activate the

password function by entering the old password.

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a

time.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of this projector) if you

want the projector to automatically search for the signals.

You can also manually cycle through the available input signals.

1. Press SOURCE on the projector or remote control. A source selection bar

is displayed.

2. Press / until your desired signal is selected and press MODE/

ENTER.

Once detected, the selected source information will be displayed on the

screen for seconds. If there is multiple equipment connected to the

projector, repeat steps 1-2 to search for another signal.

• The brightness level of the projected image will change accordingly when you

switch between different input signals. Data (graphic) "PC" presentations using

mostly static images are generally brighter than "Video" using mostly moving

images (movies).

• The input signal type effects the options available for the Setting. See "Selecting a

picture mode" on page 28 for details.

• The native display resolution of this projector is in a 4:3 aspect ratio. For best

display picture results, you should select and use an input signal which outputs

at this resolution. Any other resolutions will be scaled by the projector depending

upon the 'aspect ratio' setting, which may cause some image distortion or loss of

picture clarity. See "Selecting the aspect ratio" on page 27 for details.

Changing Color Space

In the unlikely event that you connect the projector to a DVD player via the

projector's HDMI input and the projected picture displays wrong colors, please change the color space to YUV.

1. Press MENU/EXIT and then press / until the SOURCE menu is highlighted.

2. Press to highlight Color Space Conversion and press / to select a suitable color space.

This function is only available when the HDMI input port is in use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi EX241U Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info