Bedienungsanleitung Mitsubishi EX241U (Seite 31 von 59) (Englisch)

549871

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

EN-31

ENGLISH

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help

you achieve better time management when giving presentations. Follow these

steps to utilize this function:

1. Press TIMER SET UP on the remote control or go to the SYSTEM

SETUP: Basic > Presentation Timer menu and press MODE/ENTER to

display the Presentation Timer page.

2. Press to highlight Timer period and decide the timer period by

pressing / . The length of time can be set from 1 to 5 minutes in 1-

minute increments and 5 to 240 minutes in 5-minute increments.

If the timer is already on, the timer will restart whenever the Timer period is reset.

3. Press to highlight Timer display and choose if you want the timer to show up on the screen by pressing /

4. Press to highlight Timer

position and set the timer

position by pressing /

5. Press to highlight Timer counting direction and select your desired counting direction by pressing / .

6. Press to highlight Sound reminder and decide if you want to activate sound reminder by pressing / . If

you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep

sound will be produced when the timer is up.

7. To activate the presentation timer, press and press / to select On and press MODE/ENTER.

8. A confirmation message is displayed. Highlight Yes and press MODE/ENTER to confirm. You will see the

message “Timer is On” appearing on the screen. The timer starts counting once the timer is turned on.

If you switch input signal or press AUTO when the timer is on, the timer will be stopped.

To cancel the timer, perform the following steps.

1. Go back to the Presentation Timer page.

2. Press and press / to highlight Off and press MODE/ENTER. A confirmation message is displayed.

3. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is Off” appearing on the

screen.

How to use the TIMER On key?

TIMER ON is a multi-functional key.

• If the presentation timer is off, pressing this key displays a confirmation

message. You can decide whether to activate the timer or not by following

the on-screen instruction.

• If the timer is already on, pressing this key displays a confirmation

message. You can decide whether to restart, continue or turn off the timer

by following the on-screen instruction.

Selection Description

Always Displays the timer on screen throughout the presentation time.

1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).

Never Hides the timer throughout the presentation time.

Selection Description

Count Up Increases from 1 to the preset time.

Count Down Decrease from the preset time to 1.

5 min

EX241U

EX321U

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi EX241U Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info