Bedienungsanleitung Mitsubishi EX320U-ST (Seite 17 von 58) (Englisch)

493684

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

EN-17

ENGLISH

Connecting an HDMI device

You should use an HDMI cable when making connection between the projector and HDMI devices.

To connect the projector to an HDMI device:

1. Take an HDMI cable and connect one end to the HDMI output port of the video device.

2. Connect the other end of the cable to the HDMI input port on the projector.

In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and the projected picture

displays wrong colors, please change the color space to YUV. See "Changing Color Space" on page 23 for details.

When you connect this projector and a Digital device (such as a DVD player) via the HDMI terminal, black color may appear dark

and deep, depending on the type of the connected device.

• This depends on the black level setting of the connected device. There are two kinds of methods to digitally transfer image

data, in which different black level settings are employed respectively. Therefore, the specifications of the signals output

from DVD players differ, depending on the type of the digital data transfer method they use.

• Some DVD players are provided with a function to switch the methods to output digital signals. When your DVD player is

provided with such function, set it as follows.

EXPAND or ENHANCED -> NORMAL

• See the users guide of your DVD player for details.

• When you switch to HDMI input, the projected picture may display wrong colors for about 1 second. This is not product

malfunction.

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:

1. Take a Component Video to RGB (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the

Component Video output sockets of the Video source device. Match the color of the plugs to the color of the

sockets; green to green, blue to blue, and red to red.

2. Connect the other end of the Component Video to RGB (D-Sub) adaptor cable (with a D-Sub type connector) to

the COMPUTER-1 or COMPUTER-2 socket on the projector.

3. If you wish to make use of the projector speaker in your presentations, take a suitable audio cable and connect

one end of the cable to the audio output jack of the computer, and the other end to the AUDIO IN jack of the

projector.

4. If you wish, you can use another suitable audio cable and connect one end of the cable to the AUDIO OUT jack

of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting

the sound" on page 31 for details.

AV device

HDMI cable (option)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi EX320U-ST Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info