Bedienungsanleitung Mitsubishi FD730U (Seite 37 von 48) (Englisch)

493665

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

EN-37

This projector is equipped with a lamp to project

images. This lamp is a consumable. It may burn out

or its brightness may decrease during use. In such

cases, replace the lamp with a new one as soon as

possible. Be sure to replace the lamp with a new lamp

separately sold that is exclusive to this projector.

Contact your dealer for purchase of the lamp.

Spare lamp for FD730U/FD730U-G: VLT-XD700LP

Caution:

• Donotremovethelampimmediatelyafterusingthe

projector. You may get burned because the lamp is

very hot after use.

• Beforereplacingthelamp,pressthePOWER

button to turn off the lamp and wait for two minutes

for lamp to cool down. Unplug the power cord from

wall outlet and wait one hour for the lamp to cool

down completely.

• Donotremovethelampexceptforreplacement.

Careless handling can cause injury or ﬁre.

• Donottouchthelampwithbarehandsorgive

a shock to the lamp. Attach the lamp properly.

Improper handling may cause explosion.

• Besurenottodropthelamplidscrewintothe

projector. Also be sure not to put metal or any

ﬂammable objects inside because it may cause ﬁre

or electric shock. If any objects should fall inside,

unplug and contact your dealer.

• Installthelampsecurelytopreventfailureandre.

• Ifthelampshouldbreak,smallglassfragments

may fall out through the vents and some may

remain inside of the projector or the lamp box.

When taking the lamp box out, be sure to turn over

the projector and hold the handle of the lamp box

to avoid injury due to the glass fragments.

• Ifthelampshouldbreak,nevershakethelampbox

or hold it in front of your face after removing it. The

glass fragments may fall out and cause injury to

your eyes.

• Whenremovingthelampfromtheceiling-mounted

projector, use the lamp replacement attachment

packed with the projector or option lamp to prevent

glass fragments from scattering.

• Besuretousethelampdedicatedtothisprojector,

VLT-XD700LP for FD730U/FD730U-G. Use of other

lamps may cause a failure of the projector.

A) When the projector is placed on the

table

Make sure that the projector is securely held in place.

1. Remove the cover (a) of the screw ﬁxing the lamp

cover with a ﬁngernail. If it is difﬁcult to remove

it with a ﬁngernail, use a ﬁnetipped tool such as

ﬂathead screwdriver.

(a)

2. Remove the screw (b) and slide the lamp cover (c)

for removal.

(c)

(b)

Lamp replacement

3. Loosen the two screws (d) of the lamp unit, and

then pull out the lamp unit (f) by the handle (e).

(f)

(d)

(e)

Caution:

• Whenreplacingthelamp,donotloosenthe

screws other than two screws (d). It may cause

the failure of projector.

• Pullthelampunitoutoftheprojectorslowly.

If it is pulled out quickly, the lamp may break,

scattering glass fragments.

• Donotspillliquidontheremovedlampunitor

do not place it near any ﬂammable object or

where children can reach to prevent injuries or

ﬁre.

4. Insert the new lamp unit, and secure it with two

screws ﬁrmly.

5. Secure the lamp cover with screw (b) back again,

and mount the cover (a).

Caution:

• Makesurethatthelampcoverissecuredfirmly.

Otherwise, the POWER indicator flashes red and

green, disallowing the projector to be powered

on.

B) When the projector is mounted to the

ceiling

When removing the lamp unit from the projector

mounted to the ceiling, never fail to use the lamp

replacement attachment to protect yourself from glass

fragments and so on.

• Contactyourdealerwhenreplacingthelampunit

with the projector mounted to the ceiling.

1. Remove the lamp cover referring to the procedure

1 and 2 of “A) When the projector is placed on the

table”.

Caution:

• When opening the lamp cover to replace the

lamp of the ceiling-mounted projector, pay

careful attention because glass fragments may

exist inside the lamp cover.

2. Loosen the two screws (d) of the lamp unit.

(d)

Caution:

• Whenreplacingthelamp,donotloosenthe

screws other than two screws (d). It may cause

the failure of projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi FD730U Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi FD730U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info