Bedienungsanleitung Mitsubishi FDTC25VF (Seite 17 von 24) (Englisch)

604738

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

HOW TO MAINTAIN

How to clean the Air Filter

Clean the filter frequently for economical operation.

Caution Before cleaning, stop the operation and turn off the power supply.

Otherwise, it may lead to injury as fan inside rotates at high speed.

Caution The stepladder used for removing and attaching the air filter must be fixed firmly.

Otherwise, it may lead to injury due to overturn or fall.

Caution Be careful so that the dust does not get into your eyes when removing the air filter.

Caution Do not operate the air conditioner while the air filter is removed.

Piled up dust may lead to malfunction.

How to remove

Follow the instruction mentioned below according to the indoor unit type.

 Ceiling cassette −4 way− (FDT)

1. Hold the stoppers on the grille (2 places) to the “OPEN”

direction (arrow mark 1), and then pull down to open the

grille. Remove the hooks of the grille to dismount it.

1. Push holders (arrow mark 2) and filter frame (arrow mark

2’), and remove the filter from the holders. Then, slide the

filter in the indicated direction (3) to remove it from the

grille.

1. Check that the filter is on the right side and that its

orientation is correct. Then, hook it to the hooks. (Insert in

the way indicated with arrow mark 4)

2. Ensure to insert the holders of the grille into the filter’s holes

until clicking sounds are heard.

1. Mount the hooks of the grille to the holes on the panel. (The

hooks on the grille can be mounted in all 4 directions.)

2. Close the grille while pressing the stoppers on the grille (2

places) to the “OPEN” direction. Then, release the stoppers.

Caution Mount the filter to the grille securely.

Otherwise, it may lead to decreased efficiency due

to leakage of flow from the gap.

Caution Mount the grille securely.

Otherwise, it may fall.

Caution When the stopper is deformed or damaged,

repair or replace without delay.

Otherwise, the grille may fall.

• How to handle inlet grille/filter

Removal

Mounting

BACKUP BUTTON

In case of battery exhausted, or loss or any trouble of remote control, the air conditioner can be operated with the BACKUP button on the

indoor unit display part.

ON/OFF

Press backup button and leave it untouched for two seconds.

The operation starts.

Press it again to stop the opearation.

TIMER

CHECK RUN

Backup button

OPERATION MODE .......... AUTO FAN SPEED ............................ HI

TIMER ............................... No setting SET TEMP .............................. 23°C

AUTO SWING .................... STOP (HORIZONTAL)

SETTING

 Ceiling cassette −4 way− (FDT)

Backup button

 Ceiling suspended (FDE)

In case of FDE/FDT/FDTC

 Ceiling cassette −4 way Compact (600×600mm) − (FDTC)

Stopper



Holder

Grille

Holder

Hook

Filter

HolderFilter frame

1 on both sides

Holes for hooks

Direction for closing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi FDTC25VF Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi FDTC25VF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info