Bedienungsanleitung Mitsubishi FDUM50VF (Seite 16 von 24) (Englisch)

604740

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

To fix the position of the swing louver

Press AIR FLOW button when the louver position indication comes to the position where you

would like to fix it.

• Auto swing display stops at the position and then the swing louver stops and be fixed.

NOTICE

Press the button and auto swing display stops immediately, then the swing louver stops

later, but this is not a failure. (Auto swing display and the actual louver movement of the air

conditioner are not synchronized)

The swing louver movement during heat preparation

When “heat preparation” is displayed, the position of the swing louver

sets horizontal automatically. (The display of remote control keeps the set

position)

When heat preparation ends and normal operation starts, the position of

the swing louver returns to the set position.

Recommended air flow direction

position (when fixed)

COOL

DRY

AUTO

HEAT

How to move swing louver

Press AIR FLOW button when the air conditioner is in operation.

• The swing louver moves up and down, and the display moves too.

NOTICE

The louver position which the display shows is not synchronized with the

actual position when the louver is swinging. But this is not a failure.

UP AND DOWN ADJUSTING

continuous movement of display

HOW TO ADJUST THE LOUVER < WIRELESS REMOTE CONTROL >

horizontal position

FOR COMFORTABLE USE

See page 12

CAUTION

Do not set the position of the swing louver downwards for a long time. Dew formation on the side panel may drop.

(in case of FDE)

CHECK INDICATION, FILTER SIGN < WIRELESS REMOTE CONTROL >

J Ceiling suspended (FDE)

Check monitor Timer/check

indicator lamp

WHEN SHORT FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW)

There is something wrong with the air conditioner.

• Immediately after the timer/check indicator lamp flashed (lights for 0.5 seconds and blinks for

0.5 seconds), the air conditioner stops.

• Address No. and error code are shown on the display on the indoor unit.

• The monitor display is turned off after the display time elapses.

• When nothing is displayed on the monitor, operate the remote control or press the BACKUP

button to resume.

Please contact your dealer and inform them “address No. and error code”, “symptom of

the trouble”, “air conditioner type” and “model name” etc.

• Press the ON/OFF button to stay the air conditioner on the stop mode.

lights for 0.5 seconds and

blinks for 0.5 seconds

Timer/check

indicator lamp

WHEN LONG FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW)

Clean the filter.

☞

See page 16.

• When cumulative running time reaches to 120 hours, long flashing light (lights for 2 seconds

and blinks for 1 second) is shed from the timer/check indicator lamp (yellow).

• After cleaning of filter, press the FILTER button on the remote control to turn off the filter

cleaning sign. (Press the button for one second or more)

lights for 2 seconds and

blinks for 1 seconds

NOTICE

The cumulative running time for filter sign can be changed.

Consult your dealer for more information.

J Ceiling cassette −4 way− (FDT)

Timer/check indicator lamp

TIMER

CHECK RUN

WHEN LONG FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW)

Clean the filter.

☞

See page 16.

• When cumulative running time reaches to 120 hours, long flashing light (lights for 2

seconds and blinks for 1 second) is shed from the timer/check indicator lamp (yellow).

• After cleaning of filter, press the FILTER button on the remote control to turn off the filter

cleaning sign. (Press the button for one second or more)

NOTICE

The cumulative running time for filter sign can be changed. Consult your dealer for more information.

Light for 2 seconds,

wink out for 1 second

Check monitor Timer/check

indicator lamp

TIMER

CHECK RUN

WHEN SHORT FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW)

Something is wrong with the air conditioner.

• Immediately after the timer/check indicator lamp flashes (lights for 0.5 seconds and blinks for

0.5 seconds), the air conditioner stops.

• Address No. and error code are shown on the display on the indoor unit.

• The monitor display is turned off after the display time.

• When nothing is displayed on the monitor, operate the remote control or press the BACKUP

button resume.

Please contact your dealer and inform them “address No. and error code”, “symptom of

the trouble”, “air conditioner type” and “model name” etc.

• Press the ON/OFF button to stay the air conditioner on the stop mode.

lights for 0.5 seconds and

blinks for 0.5 seconds

 Ceiling cassette −4 way Compact (600×600mm) − (FDTC)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi FDUM50VF Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi FDUM50VF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info