Bedienungsanleitung Mitsubishi hc1100 (Seite 25 von 39) (Englisch)

215923

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

EN-25

ENGLISH

2. INSTALLATION menu

ITEM SETTING FUNCTION

LAMP MODE STANDARD Select this option when you want to view images in a well-lit room.

LOW Select to moderate the intensity of the lamp. The fan operating sound is reduced

and the lamp lifetime becomes longer.

LAMP TIME (LOW)

****H

This item shows a lamp operating time (hour) when LAMP MODE is LOW.

• When the LAMP MODE is STANDARD, this item shows a longer lamp operat-

ing time than the actual time. (See page 31 for the interval of lamp replace-

ment. )

AUTO POWER ON

ON / OFF When ON is chosen, the lamp is automatically lit when the power cord is plugged

in the wall outlet. Choose ON when using the projector mounted on the ceiling.

• The projector is in the stand-by mode when the lamp is off. Use the remote

control to turn on the lamp.

AUTO POWER OFF OFF / 5 - 60min

Use to set the time elapsed before the projector enters the stand-by mode when

there is no signal input from the source.

SPLASH SCREEN

ON / OFF Choose ON to display the splash screen when the power is turned on.

BACK COLOR

BLUE / BLACK

Use to change the color of the screen that appears when no signal is supplied.

IMAGE REVERSE

OFF Select when viewing images from the front with the projector installed on the

ﬂ oor.

MIRROR Select when viewing images projected from the behind of the screen with the

projector installed on the ﬂ oor.

INVERT Select when viewing images projected from the behind of the screen with the

projector installed on the ceiling.

MIRROR INVERT Select when viewing images from the front with the projector installed on the

ceiling.

TRIGGER OUT ON / OFF Choose ON to output the trigger output signal (12 V) from the TRIGGER terminal

when the lamp illuminates.

TEST PATTERN CROSS HATCH Select to show the test cross hatch pattern.

•

When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.

• When the lamp mode is switched, the projected image may ﬂ icker. This is not a product malfunction.

• Do not change the setting of LAMP MODE frequently.

• To cancel the test pattern, press any button.

3. FEATURE menu

ITEM SETTING FUNCTION

ASPECT AUTO Select to change the aspect ratio automatically depending on the input signal.

4:3 Select to project images with an aspect ratio of 4:3.

16:9 Select to project images with an aspect ratio of 16:9. (Linearly stretched.)

ZOOM1 Select to enlarge and project images of CinemaScope size.

ZOOM2 Select to enlarge and project images of Vista size.

STRETCH Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.

(Non-linearly stretched.)

REAL Select to project images in their original size as input. Not available when the

keystone adjustment is applied.

PASSWORD FUNCTION

Use to enable or cancel the password lock. See page 30 for details.

MENU POSITION

2 options Use to change the position of the menu.

CINEMA MODE

AUTO

The ﬁ lm mode will be automatically activated when a ﬁ lm source signal is input.

OFF The ﬁ lm mode will not be activated.

VIDEO SIGNAL 8

options

When AUTO is selected, the appropriate video format is automatically selected

depending on the input signal. If the image isn’t displayed correctly, select the

desired video format manually.

SET UP AUTO Select AUTO for normal use. When LANGUAGE is not set to and 480i,

480p or TV60 signal is input, the SET UP changes to 7.5% automatically.

OFF Select to make black lighter.

3.75% / 7.5% Select to make black intense.

• When 7.5% is chosen, the brightness is decreased by the set-up cancel

function for the U.S. Choose OFF when the image is dark.

SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with the

SCART terminal that can output RGB signal. SCART terminal is used mainly

in Europe. Choose OFF normally. (Available only for the input signal from the

COMPUTER IN/COMPONENT VIDEO IN terminal.)

LANGUAGE 10 languages Use to select the language used in the menus.

RESET ALL OK

Use to reset the settings of the menu (excluding PASSWORD FUNCTION and

LANGUAGE) to the factory setting values.

• When SCART INPUT is set to ON, normal computer signals aren’t projected.

• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device

equipped with the SCART terminal.

• Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

• It may take a little while to carry out RESET ALL in the FEATURE menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi hc1100 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info