Bedienungsanleitung Mitsubishi HC3100 (Seite 4 von 41) (Englisch)

493620

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

EN-4

Important safeguards

Please read all these instructions regarding your

projector and retain them for future reference. Follow

all warnings and instructions marked on the projector.

1. Read instructions

All the safety and operating instructions should be

read before the appliance is operated.

2. Retain instructions

The safety and operating instructions should be

retained for future reference.

3. Warnings

All warnings on the appliance and in the operating

instructions should be adhered to.

4. Instructions

All operating instructions must be followed.

5. Cleaning

Unplug this projector from the wall outlet before

cleaning it. Do not use liquid aerosol cleaners. Use

a damp soft cloth for cleaning.

6. Attachments and equipment

Never add any attachments and/or equipment

without the approval of the manufacturer as such

additions may result in the risk of ﬁre, electric

shock or other personal injury.

7. Water and moisture

Do not use this projector near water or in contact

with water.

8. Accessories

Do not place this projector on an unstable cart,

stand, tripod, bracket or table. Use only with a

cart, stand, tripod, bracket, or table recommended

by the manufacturer or sold with the projector.

Any mounting of the appliance should follow

the manufacturer’s instructions and should use

a mounting accessory recommended by the

manufacturer.

10. Power sources

This projector should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power,

please consult your appliance dealer or local

power company.

11. Power-cord protection

Power-supply cords should be routed so that

they are not likely to be walked on or pinched

by items placed upon or against them. Pay

particular attention to cords at plugs, convenience

receptacles, and points where they exit from the

appliance. Do not put the power cord under a

carpet.

12. Overloading

Do not overload wall outlets and extension cords

as this can result in a ﬁre or electric shock.

13. Objects and liquids

Never push objects of any kind through openings

of this projector as they may touch dangerous

voltage points or short-out parts that could result

in a ﬁre or electric shock. Never spill liquid of any

kind on the projector.

14. Servicing

Do not attempt to service this projector by yourself.

Refer all servicing to qualiﬁed service personnel.

15. Damage requiring service

Unplug this projector from the wall outlet and refer

servicing to qualiﬁed service personnel under the

following conditions:

(a) If the power-supply cord or plug is damaged.

(b) If liquid has been spilled, or objects have fallen

into the projector.

you follow the operating instructions. Adjust

only those controls that are covered by the

operating instructions. An improper adjustment

of other controls may result in damage and

may often require extensive work by a qualiﬁed

technician to restore the projector to its normal

operation.

(d) If the projector has been exposed to rain or

water.

(e) If the projector has been dropped or the

cabinet has been damaged.

(f) If the projector exhibits a distinct change in

performance - this indicates a need for service.

16. Replacement parts

When replacement parts are required, be sure

that the service technician has used replacement

parts speciﬁed by the manufacturer or parts

having the same characteristics as the original

part. Unauthorized substitutions may result in ﬁre,

electric shock or other hazards.

17. Safety check

Upon completion of any service or repair to this

projector, ask the service technician to perform

safety checks determining that the projector is in a

safe operating condition.

An appliance and cart combination should be

moved with care. Quick stops, excessive force and

uneven surfaces may cause the appliance and cart

combination to overturn.

9. Ventilation

Slots and openings in the cabinet are provided

for ventilation, ensuring reliable operation of the

projector and to protect it from overheating. Do not

block these openings or allow them to be blocked

by placing the projector on a bed, sofa, rug, or

bookcase. Ensure that there is adequate ventilation

and that the manufacturer’s instructions have been

adhered to.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HC3100 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info