Bedienungsanleitung Mitsubishi hc5500 (Seite 39 von 47) (Englisch)

215751

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

EN-39

Accessory air-ﬁ lter unit

An accessory air-ﬁ lter unit is supplied with this projector in order to keep dust out more effectively. When using the

projector in a dusty place, replace the air ﬁ lter (ﬁ lter cover) attached at the factory with this accessory air-ﬁ lter unit.

Attaching the accessory air-ﬁ lter unit

Before installing this accessory air-ﬁ lter unit to the projector, be

sure to unplug the projector from the outlet.

Remove the air-ﬁ lter (ﬁ lter cover) attached at the factory ﬁ rst. (See

page 38.)

Attach the accessory air-ﬁ lter unit to the projector.

Insert the tabs on the top of the accessory air-ﬁ lter unit in the

projector, and then push the accessory air-ﬁ lter unit in the

direction of the arrow.

Don’t use any other accessory air-ﬁ lter units than that designed for

this projector.

Cleaning the air-ﬁ lter

Warning:

Never use ﬂ ammable air duster or other materials when cleaning the accessory air-ﬁ lter unit. Flammable substances

may ignite causing ﬁ re or breakdown when the lamp is illuminated.

Before cleaning, be sure to turn off the main power switch and unplug the projector from the outlet.

Clean the air-ﬁ lter frequently (at least once a month). When dust accumulates on the ﬁ lter at the air inlet, the

temperature inside the projector may rise abnormally high, causing damage to the internal parts and reducing the

lifetime of the panel.

In case of any abnormality including an abnormal rise of the inside

temperature, the projector may automatically turn off and go into the

standby mode where the light source lamp is turned off in order to

protect its internal parts.

Remove the accessory air-ﬁ lter unit from the projector.

Pull the accessory air-ﬁ lter unit in the direction of the arrow

while pushing up the tabs on the bottom of the accessory air-

ﬁ lter unit.

Remove the air-ﬁ lter from the cover.

(1) Remove the holder by pushing the tab of the holder on the air-

ﬁ lter in the direction of the arrow.

(2) Remove the air-ﬁ lter (white), spacer, and air-ﬁ lter (gray).

Clean dirt and dust adhering to the air-ﬁ lter using a vacuum.

For the air-ﬁ lter (white)

If stubborn stains persist, wash the air-ﬁ lter with water

and dry well in the shade.

For the air-ﬁ lter (gray)

If stubborn stains persist, wash the air-ﬁ lter with diluted

detergent, rinse with water, and dry well.

Attach the air-ﬁ lter to the cover.

(1) Attach the air-ﬁ lter (gray), spacer, and air-ﬁ lter (white) to the

cover, aligning their notches with that of the cover.

(2) Insert the right tab of the holder to the cover and push the left

tab in the direction of the arrow to attach the cover.

Attach the accessory air-ﬁ lter unit to the projector.

Insert the tabs on the top of the accessory air-ﬁ lter unit in the

projector, and then push the accessory air-ﬁ lter unit in the

direction of the arrow.

•

Accessory

air-ﬁ lter unit

Accessory

air-ﬁ lter unit

Holder

Accessory

air-ﬁ lter unit

Holder

Cover

Air-ﬁ lter (gray)

Spacer

Air-ﬁ lter (white)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi hc5500 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi hc5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info