Bedienungsanleitung Mitsubishi HC7900DW (Seite 8 von 55) (Englisch)

549873

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

EN-8

Remote control

1 STANDBY ( ) button

2 ON ( I ) button

3 COMPUTER/COMPONENT button

4 HDMI 1/2 button

5 PICTURE MODE button

6 F.R.C. button

7 AV MEMORY buttons

8 p, q, t, u buttons

9 MENU button

10 CONTRAST button

11 BRIGHTNESS button

12 GAMMA button

13 2D-3D button (See page 26.)

14 3D MODE button (See page 25.)

15 3D SYNC PAUSE button (See page 26.)

16 COLOR MANAGEMENT button

17 ENTER button

18 IRIS button

19 ASPECT button

20 COLOR TEMP. button

21 SHARPNESS button

22 COLOR button

23 AUTO POSITION button

24 ANAMO button

Preparing your projector (continued)

Important:

• Whenyoupressanybuttonontheremotecontrol,thebuttonsontheremotecontrolarelit.Waitapprox.6

seconds after releasing the button to turn them off.

Picture quality selection buttons

Using the following picture quality selection buttons, you can easily select the preset quality setting. Every time you

press the button, the setting switches. Alternatively, you can select the picture quality setting using the IMAGE menu.

(See page 30.) Items in the menus are shown in parentheses below.

PICTURE MODE (PICTURE MODE)

... Switches the picture mode.

IRIS (IRIS) ......................................... Switches the IRIS mode.

Picture quality adjusting buttons

When you press any of the following picture quality adjusting buttons, the screen for adjusting the picture quality

appears. Adjust the picture quality by pressing the t and u buttons. The picture quality adjustment can be made

alternatively in the IMAGE menu. (See page 30.) Items in the menus are shown in parentheses below.

CONTRAST (CONTRAST) ................ Adjusts the contrast of the projected image.

GAMMA (GAMMA MODE) ................ Selects one of the preset gamma mode. Adjustment of USER mode is also

available. (See page 39.)

BRIGHTNESS (BRIGHTNESS) ......... Adjusts the brightness of the projected image.

COLOR TEMP. (COLOR TEMP.) ....... Selects one of the preset color temperatures. Adjustment of USER mode is also

available. (See page 37.)

COLOR (COLOR) .............................. Adjusts the color thickness of the projected image.

SHARPNESS (SHARPNESS) ............ Adjusts the sharpness of the projected image.

F.R.C. (FRAME RATE CONVERSION /

... For 2D image display:

F.R.C. LEVEL / 3D F.R.C. LEVEL)

Selects the setting of FRAME RATE CONVERSION. By pressing the ENTER

button with TRUE VIDEO or TRUE FILM selected and then pressing the t or u

button, you can adjust the effect level of the motion interpolation by the frame

rate conversion (F.R.C. LEVEL). (See page 31.)

For 3D image display (only when 1080p24 frame packing signal is input):

Adjusts the effect level of the motion interpolation by the frame rate conversion

to 3D images (3D F.R.C. LEVEL).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HC7900DW Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info