Bedienungsanleitung Mitsubishi HC8000D (Seite 26 von 55) (Englisch)

549872

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

EN-26

Viewing 3D images (continued)

FINE 3D SYNC.

If you feel something wrong with or ﬁnd ghosts

in the 3D image being displayed, the open/close

timing of the lens (liquid crystal shutter) of the 3D

glasses may be out of sync with the displayed

image. In such a case, adjust the setting of FINE

3D SYNC.

3D GLASSES (for HC8000D only)

When using the 3D glasses EY-3DGS-80U (or EY-

3DGS-78U) sold separately, select HIGH SPEED.

When using the general-purpose liquid crystal

shutter 3D glasses, select NORMAL.

24P FRAME RATE

When you are annoyed with ﬂicker in a bright area

in the image when a 1080p24 frame packing signal

is input, select 120Hz.

• When24PFRAMERATEissetto120Hz,

the motion interpolation by the frame rate

conversion isn’t performed while a 3D image is

displayed.

3D F.R.C. LEVEL

You can control the effect level of the motion

interpolation by the frame rate conversion while a

3D image is displayed.

• Themotioninterpolationto3Dimagesworks

only when a 1080p24 frame packing signal is

input.

To stop the signal emitted from the 3D emitter

temporarily:

While you are viewing a 3D image, the remote control

of your DVD recorder or other apparatus may not work

properly. In such a case, stop the signal emitted from

the 3D emitter temporarily by pressing the 3D SYNC

PAUSE button on the remote control of the projector.

Note that while the signal is stopped, a warning

message appears and images aren’t displayed in the

3D mode.

To convert 2D images to 3D images:

With the remote control:

1. Project a 2D image.

2. Press the 3D MODE button.

3. Press the t or u button to select AUTO and

press the ENTER button.

4. Press the 2D-3D button.

5. Press the t or u button to select ON.

• Now2Dimagesareconvertedinto3Dimages.

6. Turn the power switch on the 3D glasses to ON and

wear the 3D glasses.

7. Press the ENTER button.

• Thescreenforadjustingthedepthofthe

converted 3D images will appear.

8. Adjust the depth of the converted 3D images by

pressing the t or u button.

• Youcanselectthedepthfrom10levels(1to

10). As the level increases, the appearance of

depth is enhanced.

• Tonishtheconversionto3Dimages,pressthe

2D-3D button and then press the t or u button

to select OFF.

With the 3D menu:

(See page 29 for menu setting.)

1. Project a 2D image.

2. Display the IMAGE menu.

3. Select 3D by pressing the p or q button and press

the ENTER button.

• The3Dmenuwillappear.

4. Select 3D MODE by pressing the p or q button.

OFF

NORMAL

3D SYNC.

FINE 3D SYNC.

96Hz

24P FRAME RATE

HIGH SPEED

3D GLASSES

3D F.R.C. LEVEL

2D-3D

CONVERSION

3D DEPTH

3D MODE

AUTO

5. Set 3D MODE to AUTO by pressing the t or u

button and then press the ENTER button.

6. Reapeat steps 2-3 to display the 3D menu again.

7. Select 2D-3D CONVERSION by pressing the p or

q button.

OFF

NORMAL

3D SYNC.

FINE 3D SYNC.

96Hz

24P FRAME RATE

HIGH SPEED

3D GLASSES

3D F.R.C. LEVEL

2D-3D

CONVERSION

3D DEPTH

3D MODE

AUTO

8. Set 2D-3D CONVERSION to ON by pressing the t

or u button.

• Now2Dimagesareconvertedinto3Dimages.

9. Turn the power switch on the 3D glasses to ON and

wear the 3D glasses.

10. Select 3D DEPTH by pressing the p or q button.

OFF

NORMAL

3D SYNC.

FINE 3D SYNC.

96Hz

24P FRAME RATE

HIGH SPEED

3D GLASSES

3D F.R.C. LEVEL

2D-3D

CONVERSION

3D DEPTH

3D MODE

AUTO

11. Adjust the depth of the converted 3D images by

pressing the t or u button.

• Tonishtheconversionto3Dimages,set2D-

3D CONVERSION back to OFF.

Important:

• Iftheviewingdistanceisnearerthanthe

recommended distance, it will cause physical

discomfort and eye fatigue.

• The3Dglassesmaynotworkproperlywhenitis

used too far from the screen.

• Watchthecontentsinfrontofthescreen,notatbig

angle. If you are viewing the screen at big angle,

you may not be able to view 3D contents correctly.

• Therearepersonaldifferencesinviewingthe3D

images. For persons with myopia, hypermetropia,

astigmatism or left and right sights, please wear

glasses to correct them then wear the 3D glasses.

• Thepictureseemsmisplacedatthestartof

projecting the 3D images, however, this is not a

malfunction.

• 3Dimagesconvertedfrom2Dimagesappear

blurred due to conversion.

•

While side-by-side or top-and-bottom 3D images are

displayed, the aspect ratio setting is ﬁxed to 16:9.

• Whenyoudisplayamenuordialogwhileviewing

side-by-side or top-and-bottom 3D images, they

are displayed in the 2D mode temporarily. When

the menu or dialog disappears, they are displayed

in the 3D mode again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HC8000D Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info