Bedienungsanleitung Mitsubishi HD5000 (Seite 14 von 24) (Englisch)

30505

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Guide Button

(Figure 13, page 13)

The GUIDE button displays the on-screen programming

guides.

•

For NetCommand® compatible satellite receivers and

some cable boxes, the GUIDE button will display the

on-screen programming guide for the receiver or cable

box. Use the ADJUST and ENT(er) buttons to navigate

the displayed Guide. For NetCommand compatible

satellite receivers, you may also be able to use the

number or other additional buttons.

•

For NetCommand compatible DVD players, the

GUIDE button will display the DVD disc menu (not

the setup menu).

•

For Ant-DTV and IEEE  devices, pressing the

GUIDE button will display the Digital Channel Guide

showing the sub-channels, or bitstreams for the current

channel or device. For Ant-DTV only the sub-channels

for the current channel are seen first. Press ADJUST

to see all the channels in memory.

•

For compatible traditional VCRs, pressing the GUIDE

button when the VCR is highlighted on the Device

Selection menu, will change the VCR’s input.

•

For IEEE  AV Discs, pressing GUIDE will display

the Track List screen (Figure ).

• For selected NetCommand compatible A/V Receivers:

Display the device selection menu. Press Audio to move

the navigation to the audio section and highlight the

A/V Receiver icon. Pressing Guide will now switch

from analog audio to digital audio and vice versa.

Guide Button, AV Disc Search, Track List Screen

Track List Screen

(Figure 14)

When viewing an IEEE  AV Disc, press the GUIDE

button to display the Track List screen. This screen

provides a list of tracks for the AV Disc, the time and date

the track was added, its duration, and the title of the track.

Tracks will be listed in time order with the most recent

recording listed first. Track Lists vary in size. Press

ADJUST or to navigate through the Track List. To

play a track, select it on the list, then press ENT(er). Press

CH or to change pages of the list.

Once a track is selected, the first program begins to play.

If there are multiple programs in the track, the names

are displayed. Another program for the same track can

then be selected. A track must be playing for the multiple

programs to be displayed. To delete a track, select it, then

press CANCEL. If the track includes multiple programs,

all of them will be deleted.

Figure 14. Track List screen

AV Disc Search

NetCommand is able to search to a specific time in an

IEEE  AV Disc recording.

. Start the playback of the desired track on the AV disc.

. Use the number buttons to enter the time code

position of hours followed by minutes. For example,

to enter one hour and twenty-two minutes (:) into

the track, enter , , .

. Press ENT(er) to skip to the time code position.

. To cancel the request or to start over, press CANCEL

instead of ENT(er).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HD5000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info