Bedienungsanleitung Mitsubishi HD5000 (Seite 19 von 24) (Englisch)

30505

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• When a Device is selected from the Device Selection

menu, the screen is blue (no signal source).

• Make sure the selected device is turned on.

• From the Edit NetCommand® menu select Review then check the

Review screen to see if inputs match the actual connections on the

HDTV Receiver. If they do not match, either change the

actual connections, or select Change on the EditNetCommand menu

to change the HDTV Receiver’s Memory for the connection.

• The Device does not respond to key presses from the

remote.

• Remote has not been setup for NetCommand use. See the

HD- Owner’s Guide.

• The incorrect manufacturer was selected during setup. Select

Change on the Edit NetCommand menu and then select the device

to display the manufacturer selection. Change if necessary.

• The device is not supported.

• The requested function is not supported by NetCommand.

Verify the function supported.

• The IR emitter is incorrectly placed. Make sure the IR

emitter is facing the IR sensor in the device.

• The IR emitter is not plugged into the IR emitter Output

NetCommand.

• The IR emitter is facing the HDTV Receiver IR Sensor,

causing double signals. Be sure that the IR emitter cannot “see” the

HDTV Receiver IR Sensor.

• The A/V Receiver is the selected audio source but

there is no sound.

• Check to see if the A/V Receiver power is turned on. After the

power is turned on, redisplay the Device Selection menu and press

ENT(er) to allow NetCommand to correctly select the A/V Receiver

input.

• From the Edit NetCommand select Review. Check the Review screen

to see if the A/V Receiver inputs for the selected configuration match

the actual connections on the A/V Receiver. If they do not match,

either change the actual connections, or select Change on the Edit

NetCommand menu to change the HDTV Receiver memory for the

connection.

• The Speaker icon or A/V Receiver icon is grayed

out and not selectable.

• Select Change from the Edit NetCommand menu, and then

select the device. Once the Connection screen is displayed,

check if the audio checkbox is selected for the HDTV Receiver

input and/or AVR input.

• Devices are grayed out in the Device Selection menu

or the PIP Selection menu.

• A recording is in progress requiring the use of Monitor Out.

Cancel the recording to select the device.

• Digital devices (Ant-DTV and  devices) and devices with

scanning rate of p or i cannot display in the PIP or

POP.

• Cannot see the A/V Receiver menu. • Normally, the A/V Receiver is not connected to any

input of the HDTV Receiver. To check the A/V Receiver

menu, temporarily plug into an unused input of the HDTV Receiver.

Then after selecting Review from the Edit NetCommand menu,

turn the input On to view the A/V Receiver menu.

• The REC button is not working, or, on the Transport

menu the record key is grayed out and not available.

• The device does not support recording, such as a DVD player.

• Recordings can not be initiated from the Transport menu when

the device is an IEEE  device. To record to an IEEE 

device, change the HDTV Receiver to the ANT-DTV or source

device for the recording and press the REC key. The Record

menu displays allowing setup of a recording.

• Excessive digital artifacts. • The IEEE  cable is too long (maximum of  feet between

devices.)

•There may be a slow device in the middle of the IEEE 

network. Move the slow devices to the end so that connections

for faster devices do not pass through them.

Problem Possible Solution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HD5000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info