Bedienungsanleitung Mitsubishi HD5000A (Seite 16 von 24) (Englisch)

30512

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

NetCommand® Controlled Recordings

Recording Setup

(Figure 15)

Your HDTV Receiver is able to start and stop recordings

automatically and send the signals from one external

playback device to another external recording device. It

is also able to convert digital signals from Ant-DTV and

from IEEE  devices to analog signals that can be

recorded on NetCommand compatible analog VHS and

S-VHS VCRs. You cannot record from an analog device

such as Ant-A, Ant-B or a VHS or S-VHS VCR to a

digital recording device such as a D-VHS VCR or AV

Disc.

You can schedule the recording to take place at a later

time and program the recording duration, in  minute

increments, to last from  minutes to  hours.

When a digital recording is being made, the HDTV

Receiver will direct the signals to the recording device

using the IEEE  cable. During the recording the

HDTV Receiver is able to watch any analog source or can

be turned off.

When an analog recording is being made, the HDTV

Receiver will direct signals to the recording device using

the Monitor Output Video or S-Video and stereo left and

right audio.

During the analog recording, the HDTV Receiver can be

powered Off. If the HDTV Receiver is powered On, it

must be watching the source that is being recorded.

If the Monitor outputs are sent to the A/V Receiver, then

the A/V Receiver must be turned on and set to the HDTV

Receiver input.

Recording Now

While viewing Ant-A, Ant-B, Ant-DTV, an IEEE 

device, or a non-recording traditional device, pressing the

REC button will bring up the Record/Connect Screen.

To initiate recording now:

. Display the Device Selection menu.

. Select the source device you want to record and

press ENT(er).

. While viewing the source device, press the REC

button. The Record/Connect screen is displayed.

. Check that the destination device (VCR) and duration

are OK. Change if necessary.

. Press REC a second time to initiate recording.

Time-Delayed Recording

You will need to select the destination device that you want

to record to, the duration of the recording, the start time,

day, and channel. Recording day includes same day every

week, everyday and Monday through Friday.

To initiate a time-delayed recording:

. Display the Device Selection menu.

. Select the source device you want to record and press

ENT(er).

. While viewing the source, press the REC button.

. Select the destination device, duration time, the start

time and day. For source devices that can select

channels, select the channel.

. Select the Add button to add the recording to the

record list (a confirmation message will be displayed).

. Select the Quit button when all recordings have been

added.

Figure 15. Record/Connect Screen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HD5000A Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info