Bedienungsanleitung Mitsubishi HSHD2000U (Seite 14 von 80) (Englisch)

31038

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Playback

Setting Up Your VCR to Playback/Recording the

Digital Broadcast in D-VHS Format

1 Make sure that your VCR and the integrated HDTV or the IEEE 1394-equipped

HDTV receiver is connected with an IEEE 1394 cable.

2 Turn on the IEEE 1394-equipped HDTV receiver.

3 Turn on your TV and switch the input of the TV to the correct input of the IEEE

1394-equipped HDTV receiver.

4 Press POWER on the VCR to turn the power on.

To go back to viewing the picture from the TV, set your TV input to the previous

ANTENNA input position.

If you do not switch the integrated HDTV or the IEEE 1394-equipped HDTV re-

ceiver to the correct external input, the screen to the right will be displayed on the

screen when you try to watch a digital broadcast.

1394 connection list

When you connect an integrated HDTV, an IEEE 1394-equipped HDTV receiver or

a D-VHS VCR to the HS-HD2000U, you can see the list of connected TV, receiver

or VCR on the 1394 connection list menu (up to 5 devices). The integrated HDTV

and the IEEE 1394-equipped HDTV receiver will display as TUNER and the D-VHS

VCR will be shown as VCR. For the device which was connected to the HS-

HD2000U before but now it is not connected, lost connection will be displayed.

The device which was first connected to the HS-HD2000U will be shown as d1,

and connected fifth will be shown as d5. When you want to remake the list, press

CANCEL on the VCR remote control. In this case, the order of the devices on the

list will be changed.

IMPORTANT

When you connect Mitsubishi integrated HDTVs WS-55859, WS-65869, WS-

55909, WS-65909 or WS-73909, they will not appear in 1394 connection list

menu. When you use these TVs, they will control the HS-HD2000U. So to

use the function of the HS-HD2000U, use the TV to operate the VCR.

displaying 1394 connection list

1 Press MENU on the remote control. VCR Main Menu comes up.

2 Turn the ADJUST dial on the remote control to select 1394 connection list.

Turn the shuttle ring to the right. 1394 connection list menu appears.

Setting Up Your VCR to Playback/Recording the

Tape in Analog (S-VHS/S-VHS ET/VHS) Format

The first thing you need to do is set up your VCR so that you can see the picture

coming from the VCR. It’s important to take a few minutes to set up your VCR

correctly before you try to use it. Based on the type of TV that you have, choose

one of the following:

TV with Audio/Video Inputs

1 Turn on your TV and switch it to the correct external input. For most Mitsubishi

TVs, this means pressing the TV’s INPUT button until you see the words Ext-1

or Input-1 on the screen. If you do not have a Mitsubishi TV, please refer to

your TV Owner’s Guide for this procedure.

2 Turn the VCR on by pressing POWER.

VCR POWER

IEEE 1394

INPUT

PWR.

STD

VCR

HMS

ƒ1394 connection list

d1 TUNER lost connection

d2 TUNER lost connection

d3 TUNER now connecting

d4 VCR now connecting



Press CANCEL to renumber

Use ADJUST to select,

and ENTER.

Press MENU to go back.



This is a digital

recording.

You cannot view it

through this input.



Please select IEEE1394

connection.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HSHD2000U Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info