Bedienungsanleitung Mitsubishi HSHD2000U (Seite 20 von 80) (Englisch)

31038

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

7 When the brand code is correct, turn the shuttle ring to the right. The screen

will add a Channel selection.

8 Use the ADJUST dial to select the channel on which your cable box or digital

cable box sends a signal to the VCR (normally channel 3 or 4). If you

connected your cable box or digital cable box with audio/video cables, use

INPUT to select L1 (if you used the rear panel jacks), or L2 (if you used the

front panel jacks). You cannot use both digital cable box and satellite receiver.

Thus if you selected Digital cable box only in step 4, you cannot select L2.

9 After entering the channel number, turn the SHUTTLE ring to the right. The

VCR will begin memorizing the available channels. During this process your

TV screen, the front panel display, and your cable box or digital cable box

should all display each channel number one by one.

10 When the VCR is finished memorizing, you will see the screen for entering your

zip code. Use the number keys to enter your zip code. For example, if your

zip code is 92618, press 9-2-6-1-8.

If you enter a number incorrectly, turn the SHUTTLE ring to the left or press

CANCEL.

When you have finished entering the zip code, turn the SHUTTLE ring to the

right.

The VCR will begin to search for a channel that carries a time signal to set the

clock. If the VCR can find the channel, it will set the clock. You can see if the clock

has been set on the front panel display of your VCR.

The clock setting set up time varies, it may take up to 30 minutes as the VCR

searches one by one for a channel that carries a time signal.

If the VCR will not set the clock (the current time display still shows – –:– –), see

Setting the Clock on page 23.

11 Once the VCR has set the clock, it shows the message indicating that the first

step is completed. Then, press POWER to turn off the VCR and leave the

VCR off for the night. The full set-up will be completed overnight (from about

Midnight to 7:00AM).

During this time, the VCR will search for a channel that carries data to set the

VCR Plus+ guide channel numbers for your area and then check the guide

channel number against the channel number you receive in your home and

select the correct lineup automatically.

IMPORTANT

If you use a cable box or digital cable box, you will need to leave your cable

box or digital cable box ON at all times.

Setting Up Your VCR

∆AllSet

Your cable box sends a 

signal on which channel?

ƒBrand code 1

ƒChannel 3 



ππππππππππππππππππππππππ

Use ADJUST to select,

and ENTER.

Press MENU to go back.



∆AllSet



Use number keys to enter

ZipCode

92618



Press ENTER when done.

Press CANCEL to erase 

the ZipCode.

Press MENU to go back.

∆AllSet



Now memorizing all the 

stations you can receive

Channel 3

Stand by this may take

a few minutes 



To cancel memorization,

press CANCEL

∆AllSet



1st Step in Progress...



Please Wait.



Press MENU to go back.

∆AllSet

1st Step successful.



Please leave

your VCR Off Overnight 



AllSet will be 

completed Overnight



Press MENU to go back.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HSHD2000U Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info